Installation Guide

3a.

ASSEMBLY INSTRUCTIONS

Hardware Used

Mounting Clip

x 16

Screw

x 16

Plug power cord (B) into wall outlet.

DANGER: If using this light in a WET location,

connect this product to a Ground Fault Circuit

Interrupting (GFCI) outlet to reduce the risk of

personal injury, electrical shock or death. If one is not

provided, contact a qualified electrician for proper

installation.

3b.

REPLACING THE FUSE

WARNING

Disconnect the power before replacing the fuse. Remove plug from receptacle or other outlet device.

Do not unplug by pulling on power cord. Do not remove or replace plug. The plug on the rope light

contains a safety device (fuse access cover). Discard product if the plug is damaged.

Determine the approximate location for the rope

light (A). Temporarily place mounting clips (AA)

against the mounting surface and mark the location

of the screw holes using a pencil or marker (not

included). Attach mounting clips (AA) to mounting

surface with screws (BB).

Attach rope light (A) to the mounting surface with

mounting clips (AA).

AAAA