Installation Guide

6
REPLACING THE FUSE
1a. Open fuse cover on plug by sliding cover toward
blades. (It may be necessary to use a small flathead
screwdriver to open cover.)
1b. One spare fuse is located in the plug. Turn plug over to
remove spare fuse.
2. Remove old fuse carefully. Gently pry the metal end
nearest the blade with a very small flathead screwdriver
to loosen, then turn plug over to remove. Discard old
fuse.
2
1a
1b
3
3.
Replace old fuse with spare fuse and close fuse
access cover firmly and completely.
NOTE: Replace fuse only with a 5-Amp, 125-Volt
fuse.
Spare Fuse
Old Fuse
Plug
Plug
Spare
Fuse
Plug
Cover