ITEM #0879887 ROPE LIGHT MODEL #UCL48L Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE E237798 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-994-4148, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday.
PACKAGE CONTENTS PART DESCRIPTION QUANTITY A Rope Light 1 B Power Cord 1 A B HARDWARE CONTENTS (shown actual size) AA BB Screw Mounting Clip Qty. 16 Qty. 16 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product.
SAFETY INFORMATION WARNING • To reduce the risk of fire and electric shock, use only the power supply adapter provided with the fixture. • DO NOT use an extension cord. • To reduce the risk of burns, fire, electric shock or injury to persons, unplug from outlet before attaching or removing parts.
SAFETY INFORMATION CAUTION • DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently have dimmer controls, you will need to remove them and replace them with regular electrical switches. If you have a three-way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician install your fixture. • As a safety precaution, unplug power cord when not in use.
ASSEMBLY INSTRUCTIONS 2. Plug the male end of rope light (A) into female end on power cord (B). Slide plastic ring on power cord (B) over threads at male end of rope light (A). Securely tighten plastic ring. 2 A B Plastic Ring 3a. Determine the approximate location for the rope light (A). Temporarily place mounting clips (AA) against the mounting surface and mark the location of the screw holes using a pencil or marker (not included). Attach mounting clips (AA) to the mounting surface with screws (BB).
REPLACING THE FUSE WARNING Disconnect the power before replacing the fuse. Remove plug from receptacle or other outlet device. Do not unplug by pulling on power cord. Do not remove or replace plug. The plug on the rope light contains a safety device (fuse access cover). Discard product if the plug is damaged. 1a. Open fuse cover on plug by sliding cover toward blades. (It may be necessary to use a small flathead screwdriver to open cover.) 1b 1a 1b. One spare fuse is located in the plug.
REPLACING THE FUSE 3. Replace old fuse with spare fuse and close fuse access cover firmly and completely. 3 NOTE: Replace fuse only with a 3-Amp, 125-Volt fuse. Plug Spare Fuse CARE AND MAINTENANCE • Wipe fixture with soft, damp cloth. Do not use an abrasive cleaner on fixture. . TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Light does not come on initially or no longer comes on. POSSIBLE CAUSE 1. Power is OFF. 2.
