ITEM #1143421 TV WALL MOUNT WITH HEIGHT ADJUST MODEL #UT175TP Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-602-674-1000, 8 a.m. - 5 p.m., MST, Monday - Friday.
PACKAGE CONTENTS B D A C E F PART DESCRIPTION A Wall plate B Bubble level C Left vertical rail QUANTITY 1 1 1 PART DESCRIPTION D Right vertical rail E Tilt lever F Spring lock 2 QUANTITY 1 2 2
HARDWARE CONTENTS (shown actual size) AA BB CC DD M4 x 12 Screw Qty. 4 M5 x 12 Screw Qty. 4 M6 x 15 Screw Qty. 4 M8 x 15 Screw Qty. 4 EE FF GG HH M4 x 30 Screw Qty. 4 M5 x 30 Screw Qty. 4 M6 x 30 Screw Qty. 4 M8 x 30 Screw Qty. 4 KK LL MM NN Square washer Qty. 4 5 mm Spacer Qty. 4 10 mm Spacer Qty. 4 Steel washer Qty. 12 3 II JJ 8 mm Lag bolt Qty. 4 Anchor Qty.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF FACTORY WARRANTY. • Do not attempt to install or assemble this product if the product or hardware is damaged or missing.
M5 x 30 Screw Qty. 4 LL M4 x 30 Screw Qty. 4 KK Square washer FF KK EE M8 x 15 Screw M5 x 12 Screw Qty. 4 DD M4 x 12 Screw Qty. 4 M6 x 15 Screw BB DD LLAA CC II BB MM II DD CC * Note: Rails can be attached with M4 x 12 screws (AA), M5 x 12 screws (BB), M6 x 15 screws (CC), or M8 x 15 screws (DD) depending on your TV. CC NNJJ BB 5 EE GG EE HH FF HH GG Anchor 8 mm Lag bolt Qty. 4 Qty.
8 mm Lag bolt Qty. 4 8 mm Lag bolt Anchor Qty. 4Qty. 4 LL 5 mm Spacer MM 10 mm Spacer Hardware Used KKMM 5 mm Spacer Qty. 4 Square washer Square washer Qty. 4 KK LL M8 x 30 Screw KK HH Square 10 mm washer Spacer M5 x 30 Qty. 44 Qty. Screw Qty. 4 M6 x 30 Screw 5 mm Spacer M4 x 30 Qty. 4 Screw Qty. 4 GG Square washer Qty. 4 M5 x 30 Screw LL FF KK M4 x 30 Screw M4 x 30 Screw Qty. 4 * Note: 5 mm spacer (LL) or 10 mm spacer (MM) can be used depending on your TV.
5 mm Spacer Qty. 4 Square 10 mm washer Spacer Qty. Qty. 44 Steel washer KK MM OO LL NN MM PP OO 5 mm 10 mm 10arm mm Phillips Steel Square Phillips 5 mmSteel Mounting screw Spacer Spacer washer Spacer screw washer washer screw Spacer (preassembled to Qty.Qty. 4 8 Qty. Qty.4Qty. 4 8 Qty. 4 Qty. 8 Qty. 4 Qty. 8 Mounting arm (A)) Qty. 2 LL NN Steel Mounti washer (prea Qty. Moun 8 NN M8 x 30 Screw Qty. 4 8 mm Lag bolt Qty. 2 2.
ASSEMBLY INSTRUCTIONS 4 4. U se wall plate (A) to mark four mounting hole locations. Note: Use bubble level (B) to level wall plate (A). A B 5 Anchor Qty. 4 Anchor Qty. 4 5. Drill four 7/32 in. pilot holes 2-1/3 in. (60 mm) deep at the marked locations for the mounting holes. A 1 NN Steel washer Qty. 12 M8 x 30 Screw Qty. 4 2 m cer .4 M 10 mm Spacer Qty. 4 HH 8 NN II x4 G NN MM 15 ew .4 Steel washer M8 x 15 Screw Qty. 4 M8 x 30 Screw Qty. 4 M6 x 30 Screw Qty.
ASSEMBLY INSTRUCTIONS 7 Concrete Installation 7. Use wall plate (A) to mark four mounting hole locations. Note: Use bubble level (B) to level wall plate (A). A B 8. Drill four 3/8 in. pilot holes 2-3/4 in. (70 mm) deep at the marked locations for the mounting holes. 8 9. I nsert anchors (JJ) into holes. Tap with hammer (not included) if necessary. 9 1 x4 JJ Anchor 1 2 JJ 8 mm Lag bolt Qty. 4 II r 0 9 5 JJ Anchor Qty.
12. Pull spring locks (F) down and push bottom of panel toward wall. Release spring locks (F) when panel is secure. F 1 10 MM 11 Steel washer Qty. 12 II D C 12 2 F 10 mm Spacer Qty. 4 M8 x 30 Screw Qty. 4 NN x4 Steel 8 mm Lag bolt washer Qty. 4 Qty. 12 x4 5 mm Spacer Qty. 4 LL M6 x 30 Screw Qty. 4 10 mm Spacer Qty. 4 HH NN A Square washer Qty. 4 KK 5 mm Spacer Qty. 4 GG M8 x 15 Screw Qty. 4 Hardware Used M5 x 30 Screw Qty. 4 Square washer Qty. 4 FF MM Final Installation 11.
ASSEMBLY INSTRUCTIONS 13 3 2 13. To adjust tilt, loosen both tilt levers (E) and move panel to desired position. Tighten both tilt levers (E) to hold desired tilt. -3°–12° 2 Note: For clarity, illustration is shown with panel removed. or E 3 5 mm or 3 1 1/2 in. Additional Security (Optional) 14. Secure panel with 7 mm pad lock (not included) for theft security.
ASSEMBLY INSTRUCTIONS Leveling 1. Adjust the screws on the vertical rails to level the flat panel. 1 2. Use the built in level to gauge the adjustment. 2 Note: bubble in level will be centered when correct. 12 Lowes.
WARRANTY This product is covered against defects in materials and workmanship for 5 years. The manufacturer will repair or replace the defective component or product, at its sole discretion. Failure to follow product care instructions from the manufacturer will void the warranty. To obtain warranty service, contact customer service at 1-602-674-1000. You must supply a copy of your original receipt. If your product must be shipped for inspection, you will be responsible for the shipping charges.
Printed in China 14 Lowes.
ARTÍCULO #1143421 SISTEMA DE MONTAJE DE TELEVISOR PARA PARED CON AJUSTE DE ALTURA MODELO #UT175TP ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-602-674-1000, de lunes a viernes de 8 a.m. a 5 p.m., hora estándar de la Montaña.
CONTENIDO DEL PAQUETE B D A C E F PIEZA DESCRIPCIÓN A Placa para pared B Nivel de burbuja C Riel vertical izquierdo CANTIDAD 1 1 1 PIEZA DESCRIPCIÓN D Riel vertical derecho E Palanca inclinable F Resorte de bloqueo 16 CANTIDAD 1 2 2
ADITAMENTOS (se muestran en tamaño real) AA BB CC DD Tornillo M4 x 12 Cant. 4 Tornillo M5 x 12 Cant. 4 Tornillo M6 x 15 Cant. 4 Tornillo M8 x 15 Cant. 4 EE FF GG HH Tornillo M4 x 30 Cant. 4 Tornillo M5 x 30 Cant. 4 Tornillo M6 x 30 Cant. 4 Tornillo M8 x 30 Cant. 4 KK LL MM NN Arandela Espaciador Espaciador cuadrada de 5 mm de 10 mm Cant. 4 Cant. 4 Cant. 4 Arandela de acero Cant. 12 17 II JJ Tirafondo de 8 mm Cant. 4 Ancla de expansión Cant.
INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. ADVERTENCIA • ASEGÚRESE DE LEER, COMPRENDER Y SEGUIR LAS INSTRUCCIONES ADECUADAMENTE; DE LO CONTRARIO, PUEDEN OCASIONARSE LESIONES PERSONALES GRAVES, DAÑOS A LA PROPIEDAD O ANULACIÓN DE LA GARANTÍA DE FÁBRICA. • No intente instalar o ensamblar el producto si faltan algunas piezas o los aditamentos están dañados.
M5 x 12 Screw Qty. 4 FF M5 x 30 Screw Qty. 4 LL M4 x 12 Screw Qty. 4 EE M4 x 30 Screw Qty. 4 KK DD Tornillo M8 x 15 KK Arandela cuadrada II BB MM AA DD II DD CC * Nota: los rieles pueden adherirse con tornillos M4 x 12 (AA), M5 x 12 (BB), M6 x 15 (CC) o M8 x 15 (DD), según el televisor. CC NNJJ BB M8 x 30 Screw Qty. 4 19 EE HH x4 x4 FF FF HH GG Anchor 8 mm Lag bolt Qty. 4 Qty.
8 mm Lag bolt Qty. 4 8 mm Lag bolt Anchor Qty. 4Qty. 4 LL Espaciador de 5 mm MM Espaciador de 10 mm Aditamentos utilizados KKMM 5 mm Spacer Qty. 4 Arandela cuadrada Square washer Qty. 4 KK LL Tornillo M8 x 30 KK HH Square 10 mm washer Spacer M5 x 30 Qty. 44 Qty. Screw Qty. 4 Tornillo M6 x 30 5 mm Spacer M4 x 30 Qty. 4 Screw Qty. 4 GG Square washer Qty. 4 Tornillo M5 x 30 LL FF KK Tornillo M4 x 30 M4 x 30 Screw Qty.
3. U tilice un detector de vigas (no se incluye) para localizar las vigas de madera. Marque las ubicaciones en los bordes y en el centro. 5 mm Spacer Qty. 4 Square 10 mm washer Spacer Qty. Qty. 44 KK MM OO LL NN MM PP OO 5 mm 10 mm 10arm mm Phillips Steel Square Phillips 5 mmSteel Mounting screw Spacer Spacer washer Spacer screw washer washer screw Spacer (preassembled to Qty.Qty. 4 8 Qty. Qty.4Qty. 4 8 Qty. 4 Qty. 8 Qty. 4 Qty. 8 Mounting arm (A)) Qty. 2 LL NN Steel Mounti washer (prea Qty.
INSTRUCCIONES DE ENSAMBLAJE 4. Utilice una placa para pared (A) para marcar las ubicaciones de los cuatro orificios de montaje. 4 Nota: utilice un nivel de burbuja (B) para nivelar la placa para pared (A). A B 5 Anchor Qty. 4 5. T aladre cuatro orificios guía de 7/32 pulg. con 2-1/3 pulg. (60 mm) de profundidad en las ubicaciones marcadas para los orificios de montaje. Steel washer8 mm Lag bolt Qty. 4 Qty. 12 1 NN 2 II Steel washer Qty. 12 NN HH NN M8 x 15 Screw Qty. 4 M8 x 30 Screw Qty.
INSTRUCCIONES DE ENSAMBLAJE Instalación en pared de concreto 7. Utilice una placa para pared (A) para marcar las ubicaciones de los cuatro orificios de montaje. 7 Nota: utilice un nivel de burbuja (B) para nivelar la placa para pared (A). A B 8. T aladre cuatro orificios guía de 3/8 pulg. con 2-3/4 pulg. (70 mm) de profundidad en las ubicaciones marcadas para las orificios de montaje. 8 9. I nserte las anclas de expansión (JJ) en los orificios.
Anchor Qty. 4 INSTRUCCIONES DE ENSAMBLAJE Steel washer8 mm Lag bolt Qty. 4 Qty. 12 2 II Steel washer Qty. 12 NN M8 x 30 Screw Qty. 4 Square washer Qty. 4 A 2 F 1 24 10 mm Spacer Qty. 4 MM LL KK C 5 mm Spacer Qty. 4 M6 x 30 Screw Qty. 4 12 12. Jale los resortes de bloqueo (F) hacia abajo y presione la parte inferior del panel contra la pared. Una vez asegurado el panel, libere los resortes de bloqueo (F). D M5 x 30 Screw Qty. 4 Square washer Qty. 4 5 mm Spacer Qty.
INSTRUCCIONES DE ENSAMBLAJE -3°–12° Nota: para obtener una explicación más clara, vea la ilustración del panel retirado. 3 2 13 13. Para ajustar la inclinación, afloje las palancas de inclinación (E) y mueva el panel a la posición deseada. Apriete las palancas de inclinación (E) para mantener la inclinación deseada. 2 o E 3 5 mm o 3 1 1/2 pulg. 14 Seguridad adicional (opcional) 14. Asegure el panel con candados de 7 mm (no se incluyen) para evitar robos.
INSTRUCCIONES DE ENSAMBLAJE Nivelación 1. Ajuste los tornillos en los rieles verticales para nivelar el panel plano. 1 2. Use el nivel integrado para medir el ajuste. 2 Nota: la burbuja en el nivel estará en el centro cuando sea correcto. 26 Lowes.
GARANTÍA Este producto tiene garantía contra defectos en los materiales y mano de obra por 5 años. El fabricante reparará o reemplazará el componente o producto defectuoso según su criterio. El incumplimiento de las instrucciones del fabricante acerca del cuidado del producto anulará la garantía. Para obtener el servicio de garantía, llame al Departamento de Servicio al Cliente al 1-602-674-1000. Deberá proporcionar una copia del recibo original.
Impreso en China 28 Lowes.