Instructions Manual

20
Copyright © 2011 Star Water Systems. All rights reserved.
21
Copyright © 2011 Star Water Systems. All rights reserved.
ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK
L4
L1
L4
L1
3. Thread the cable from the house electrical
service through one of the holes in the side
of the pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire. (Fig. 3)
IL1162
L4
L1
Strain Relief
3
4. Connect the two wires from the house
electrical service to the outside pressure
switch terminals (L1 and L4). (Fig. 4)
4
IL1165
5. Thread the cable from the pump through
the remaining hole in the side of the
pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire.
5