1. Dig pipe grooves for per-burying pipes. 2. Install Main Body and inlet pipe. 3. inlet pipe surface slightly below the tile surface. 2.75" 70mm 40-50" 1000-1200mm | 60-65mm 3.0" 80mm 6 150mm 1000-1200mm 250-300mm bo9 HOT COLD Hot water In Cold water in rushed =2}\ wall surface | 2-mm AN the distance between inlet pipe surface , and tile surface =| flush with | _ || finish wall | subsurface A| wall ele 4. install the trim plate 5. install diverted and handle 6.