Installation Guide

Item: B2126 Cabinet
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which
may have come loose inside carton during shipment. Identify and count all parts and compare with the parts list below.
ASSEMBLY INSTRUCTION
No.
Component Q'ty
1
Cabinet
Legs 6
A
B
1
C
ASSEMBLY INSTRUCTION :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast and easy assembly
WARNING !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
3. Two persons are required for assembly.
4. Approximate assembly time : 1/2 hours.
5. Component parts and fittings contained in the box.
Please sort out all parts before you begin to assemble the item.
This is to make sure you always use the correct part .
6. It is STRONGLY RECOMMENDED that you ANCHOR this product .
Toppling furniture can cause serious injuries and death.
This product has not been fitted with an anchor strap.
To prevent your furniture from tipping forward it is strongly recommended
that you securely attach this product to a wall or other solid surface, using the anchor straps
provided and appropriate fixings.
No. Hardware list
Q'ty
12
1
4
Allen key K4
Bolts 1/4''x50mm
3
Flat washers Ø1/4''x 19mm
Spring washers Ø1/4''x 11mm
2
12
1
12
Page 1/1
The products are heavy and woody. If you find any damage after takeopening, please be sure to
pictures or the damage and contact us. We will help you solve the problem as soon as possible.
Latch Shelf
Screws #3.5x12mm
12
12
5
6
Adjust Shelves (L+R)
2
D
Step 2 :
Spring washers (2)x12
And Flat washers (3)x12.
Connect (A) and(B)
Use Bolts 1/4*50(1)x12,
4
1
2
3
Step 2
And take shelf panel put on latch shelf.
After that use Screws (6) x12 full tighten.
Connect (D), (C) and (A)
Use latch shelf (5)x12 put into perforation
Step 3.1
Step 3.2
6
5
C
Adjust Shelf Between
A
B
B
B
B
A
C
D
D