User's Manual

Notice
All data and information contained in or disclosed by this document are confidential and
proprietary information of UTStarcom Inc., and all rights therein are expressly reserved.
By accepting this material, the recipient agrees that this material and the information
contained therein are held in confidence and in trust and will not be used, copied,
reproduced, or distributed in whole or in part, nor its contents revealed in any manner
to others without the express written permission of UTStarcom Inc. UTStarcom Inc.
does not assume any liability arising out of the application or use of its products.
UTStarcom Inc. assumes no responsibility for any damage or loss resulting from the
misuse of its products. UTStarcom Inc. assumes no responsibility for any loss or claims
by third parties, which may arise through the use of its products. UTStarcom Inc.
assumes no responsibility for any damage or loss caused by the deletion or loss of data
as a result of malfunctions or repairs. The information contained in this document is
subject to change without notice. Information contained herein is for reference only and
does not constitute a commitment on the part of UTStarcom Inc. Although the
information in this document has been carefully reviewed and it’s believed to be reliable,
UTStarcom Inc. assumes no responsibility or liability for any errors or inaccuracies that
may appear in this document nor are they in anyway responsible for any loss or damage
resulting from the use (or misuse) of this document. It is advised for the customers to
contact our engineers for more information with respect to Keypad, audio interface, RF
interface and input power supply before they start an actual design.
OEM integrators and installers are instructed that the phrase. This device contains
transmitter FCC ID: O6Y-CDMRF101 must be placed on the outside of the host.
Warning: Exposure to Radio Frequency Radiation The radiated output
power of this device is far below the FCC radio frequency exposure
limits. Nevertheless, the device should be used in such a manner that
the potential for human contact during normal operation is minimized.
In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna should
not be less than 20cm during normal operation. The gain of the
antenna for Cellular band must not exceed 0dBi. The gain of the
antenna for PCS band must not exceed -3dBi.