User's Manual

4.3.2 Standby Current Drain.
Band Celluar (ch 384) PCS (ch 600)
Slot Mode SLOT1 SLOT2 SLOT1 SLOT2
Current [mA] 3.78 mA 2.63 mA 3.76 mA 2.59 mA
4.3.3 Off current drain.
-Under 100uA
4.4 Output Power
The phone output power is measured at the end of phone module antenna connector using
the RF power meter. The power level of the phone module is controlled by the base station
and the range of the power level is varied from Min output power to Max output power that is
defined in the table below.
Item Specification Min Typical Maximum Unit
Max Output Power Power Class II 23 24 26 dBm/1.23MHz
Min Output Power -53 -50 dBm/1.23MHz
4.6 Audio Interface
4.6.1 PCM Audio
4.6.1.1 QSC Timing Parameters