User's Manual

2
1.5 Product Features
- Power management: The UM100C utilizes power management and system
overhead reduction functions provided by the USB interface for maximum power
savings.
- Antenna design: Efficient, innovative design optimizes data transfer rate and
sensitivity to network signals.
- Extension Y Cable connector: Simply insert the USB connector into the USB port
of your computer to deliver a power boost, increased RF performance, and to
solve clearance issues.
- USB Modem that supports Type A USB Port interface.
- Supports North American PCS (1900 MHz), Cellular (800 MHz) and
Aws (Tx 1700MHZ, Rx 2100MHZ) bands.
- Utilizes QUALCOMM MSM6801 A chip set.
- Supports 3G network technologies.
- Average Data Rate: Upto 3.1Mbps peak data down rate download, up to 1.8Mbps
peak data rate. *Actual data rate can be varied by user environment.
- Supports Windows 2000, XP and Vista systems with installed host software and
driver.
- Compatible with Mac OSX 10.3.9 or higher.
1.6 Product Handling
- Do not put any adhesive label on the USB connector. It may leave a sticky
residue that can cause problems inside the PC USB port.
- The UM100C USB device should easily slide into the USB port. Do not force the
UM100C into the USB port as it may cause damage to the modem and/or the
port.
- Keep the UM100C in a dry and clean place. (Storage temperature: -22°F to
149°F [- 30°C to 65°C]). Keep your device away from liquids, dust and excessive
heat.
1.7 Configuration
To use the UM100C, you should install the software included in the installation CD
and configure the UM100C USB device. See the next section for more information
on software installation and USB device configuration.