User Manual

Table Of Contents

Basic Operations

2.3 Use Speed Dial

If you have assigned a phone number to one of the speed dial keys

, you can quickly call that phone number (refer to “Speed Dial”)

In standby mode, press and hold the corresponding speed dial key to

automatically display the phone number. Then press the

to call the

number.

If you have configured the IP Phone function, you can press and hold

to call the number in IP mode. (See also in section Make an IP Call).

2.4 Make an IP Call

This function requires network support. If the IP Phone function has been

correctly configured, you can dial a phone number in IP mode in one of

the following two ways:

Enter the phone number. Then press and hold to dial the number.

IP Call will be displayed.

Press and hold . After successfully connecting to the IP network,

begin to dial by following the network instructions.

Note: When you are making an IP call, only the IP access number

and the text IP Call are displayed.

Prior to using this function, the IP access number, account number

(accounts) and password must be correctly pre-configured (see

page 54 “IP Setting ” for details). Otherwise, IP Not Set will be

briefly displayed after you press and hold