User Manual

Table Of Contents

4.4.12 Pin Setting

-Setting-Pin Setting

Please insert the PIM card first before you do this operation.

In order to protect PIM card and avoid losing your personal information,

you need to set Pin code for your phone:

Protect Pin Code

If you set your Pin Code active and the PIM card has been inserted in

your phone, you need to input the correct Pin Code when you set your

phone on (Change your PIN code). Then the phone is in standby time

Press

to select Pin On and Off, press the left soft key (OK)

The local service providers might have different rules for the PIM. If

you could not turn off Protect Pin Code function, please contact

your local service provider.

Change Pin Code

When you set Protect Pin Code off, you could not change Pin Code.

Please turn on the Protect Pin Code first, then change the pin Code.

Please ask the initial Pin Code when you buy the PIM card.

After you access this option,” Please Insert Pin Code” is displayed, enter

the initial Pin Code. Press the left soft key

(OK). Then enter new Pin

Code, and press the left soft key

(OK) again. Then repeat the Pin

Code to confirm, press the left soft key

(OK) to complete this

operation.

Please remember your Pin Code. When you turn on the phone or change

your Pin Code, the PIM card is locked if you continually enter wrong Pin

code three times. After 2 seconds, ”Please Input PUK” is displayed.

Please contact your local service provider and get PUK Code, and enter

right PUK code to unlock the PIM.