User Manual

Input Method
4. Enter symbols: When no word is underlined, press
1
to display the
symbol list. Press
to highlight the intended symbol. Press the left
soft key
to enter this symbol.
6.4 Letter
Switch to Letter input method; will be displayed at the lower left
corner of the screen.
1. Press
2
~
9
to enter the corresponding letter labeled on the
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears.
For example: if you press
2
repeatedly, the following letters appear
in turn:
- The letter just entered will be underlined. When the letter is
underlined, press to switch between upper and lower cases.
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
(Ok) or to remove the
underline, and then enter the next letter; or simply wait for one second
to input again. Press
0
to confirm the current letter input and enter a
space.
3. Enter symbols and spaces: After the underline disappears, press
1
to display the symbol list. Press
to highlight the intended symbol,
and then press the left soft key
to enter this symbol. Press
0
to
enter a space.
70