User Manual

17
Getting Started
Basic
Operations
Advanced
Dialing Services
Using Advanced
Functions
Appendix
Displaying your own number
You can display your own number. You can do this while waiting for a call
or during a call.
1 Press and hold down the key.
When “F_” appears in the information area of
the display release the key.
2 Press the key.
Your own number of the phone is displayed.
To clear the display, press the
key. Even if
you do not press the
key, the display will
be cleared after 20 seconds.
• If the number exceeds 11 digits, the num-
ber will be scrolled.
• If you press the
key during a call, the
call will be disconnected.
Changing the ring volume
You can check and adjust the settings for the ring volume of the ring
pattern. The default setting is High.
You can adjust the setting while waiting for a call.
1 Press and hold down the key.
When “F_” appears in the information area of
the display release the key.
2 Press the key.
The current volume setting is displayed.
3 Press the or key to adjust the
volume.
You can set the volume to High,
Low, or Off.
Pressing the
or key
causes the phone to play the
ring pattern at the selected vol-
ume.
Pressing the
key reduces
the volume. If the volume set-
ting is Off, then pressing the
key will have no effect.
Using Advanced Functions
(High)
(Low)
(Off)
Volume setting
Using Advanced
Functions
UTS700X_Body.pm6 1/6/00, 2:50 PM17