User Manual

22
Changing the “NO SERVICE AREA” alert
You can check and adjust the setting for the alert tone that informs you
when you have moved outside the service area and that the signal re-
ception has deteriorated. The default setting is ON-1. You can adjust the
setting while waiting for a call.
1 Press and hold down the key.
When “F_” appears in the information area of
the display release the key.
2 Press the key.
“ON-1 OFF-3” is displayed and the current
setting blinks.
3 Press the or key.
: An alert tone is emitted.
: An alert tone is not emitted.
4 Press the key.
The phone returns to the display before the
key was pressed.
Even if you do not press the
key, the dis-
play will be cleared after 20 seconds.
Changing the “HAND OVER” tone
Your phone has a function, called HAND OVER, that searches for a
stronger reception signal if the current signal becomes weak. You can
check and adjust the settings for the tone that is emitted when this HAND
OVER function operates. You can adjust the setting while waiting for a
call.
1 Press and hold down the key.
When “F_” appears in the information area of
the display release the key.
2 Press the key.
“ON-1 OFF-3” is displayed and the current
setting blinks.
Using Advanced Functions
UTS700X_Body.pm6 1/6/00, 2:50 PM22