User's Manual

Chapter 9 CLI Command Set 135
exchange (for example, the client provided an invalid password).
Use the no form of this command to return to the default setting.
During the quiet period, the switch does not accept or initiate
any authentication requests. The user should change only the
default value of this command to adjust for unusual
circumstances such as unreliable links or specific behavioral
problems with certain clients and authentication servers. To
provide a faster response time to the user, enter a smaller
number than the default.
Syntax: dot1x quiet-period <seconds>
no dot1x quiet-period
Possible value: seconds: 0-65535s
Default value: 5s
Access level: 2
Explanation: Use this command to set another authentication
beginning period after a failed authentication exchange.
Dot1x Re-Authenticate
Use this command to manually initiate a re-authentication of all
802.1X-enabled ports or the specified 802.1X-enabled port. The
user can use this command to re-authenticate a subscriber
without waiting for the configured number of seconds between