User's Manual

162 Chapter 9 CLI Command Set
Static-User
Use this command to add or delete a static user.
Syntax: static-user {mac <mac-addr>}
no static-user {mac <mac-addr>}
Access level: 2
Static-User Enable / Disable
Use this command to enable or disable a static user.
Syntax: static-user {mac <mac-addr>} <[enable]/[disable]
Possible value: mac-addr: xx:xx:xx:xx:xx:xx
Default value: disable
Access level: 2
Telnet Client
Use this command to set which IP address (subnet) can or
cannot access the device via telnet. (UP TO 10)
Syntax: telnet client <ip-address> [netmask]
no telnet client <ip-address> [netmask]