User's Manual

Chapter 9 CLI Command Set 163
Access level: 2
Telnet Server Enable / Disable
Use this command to enable/disable the telnet server.
Syntax: telnet server {enable|disable}
Default value: disable
Access level: 2
Telnet Timeout
Use this command to set the aging time how long the Telnet will
be logout without any user input.
Syntax: telnet timeout <value>
no telnet timeout
Possible value: value: 0~240 minutes (0 means to disable
timeout)
Default value: value: 6 minutes
Access level: 2
Explanation: Use this command to set telnet aging time