User's Manual

Chapter 9 CLI Command Set 165
Syntax: vlan employee default-vid <vid>
no vlan employee default-vid
Possible value:
vid: 1-4094
Default value: 1
Access level: 2
VLAN Enable/Disable
Use this command to enable or disable VLAN. The command
will be valid if the VLAN module is available.
Syntax: vlan {enable|disable}
Access level: 2
Explanation: Use this command to enable or disable VLAN
VLAN Mode
Use this command to set VLAN work mode.
Syntax: vlan mode {user-based|port-based|mix}
no vlan mode