User's Manual

170 Chapter 9 CLI Command Set
high-address: (Optional) The last IP address in the excluded
address range
Default value: All IP pool addresses are assignable..
Access level : 2
Explanation: Use this command to exclude or remove the
excluded IP address from the pool.
Gateway
Use the gateway DHCP pool configuration command to specify
the default gateway for a Dynamic Host Configuration Protocol
(DHCP) client. To remove the default gateway, use the no form
of this command.
Syntax: gateway <address>
no gateway
Possible value: address: Specifies the IP address of the
gateway
Access level: 2
Explanation: Use this command to set/remove the gateway