User's Manual

Chapter 9 CLI Command Set 177
DTIM Interval
Use this command to set the DTIM (Delivery Traffic Indication
Message) interval based on 802.11
Syntax: dtim interval < number>
Possible value: number: 1-255
Default value: 2
Access level: 2
Power
Use this command to set the transmit power of the wireless
card
Syntax: power < value>
Possible value: value: 100mw, 50mw, 25mw, 10mw
Access level: 2
Explanation: Use this command to set the transmit power of
the card