User's Manual

Chapter 9 CLI Command Set 203
MAC address :
IP address :
Subnet mask :
Default gateway : (wan only)
Show IP-Route
Use this command to display the static or all route entries.
Syntax: show ip-route [static]
Access level: 0
Show Access-List Configuration
Use this command to display the access-list configuration.
Syntax: show access-list configuration
Access level: 0
Show Port Config
Use this command to display the configuration information of
one or all ports, such as speed duplex, priority, PVID and so on.
Syntax: show port config
Access level: 0