User's Manual

Chapter 9 CLI Command Set 209
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
wpa auth mode : wpa
encryption mode : tkip
gtk update interval : 1800 seconds
wpa-psk passphrase : abcdefg
Show Webserver
Use this command to display the WEB Server configuration.
Syntax: show webserver
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
WEB Status : enable
Show VLAN Configuration
Use this command to display VLAN configuration. This
command will be valid if the VLAN module is available.
Syntax: show vlan configuration