User's Manual

44 Chapter 5 Web-based Configuration
Field Description
Default
Value
Power Transmitting power of the AP
wireless port.
Possible values are: 10mw, 20mw,
50mw, 100mw
100mw
Tx Rate Transmission rate.
The range of selectable values is
decided based on the wireless
mode set in the basic config. If
Auto is chosen, the network card
will select the current optimum
rate.
Possible values are: 11Mbit/s,
5.5Mbit/s, 2Mbit/s, 1Mbit/s, Auto.
auto
Basic Rate The network card is restricted to
operate at the selected Tx rates.
1, 2Mbit/s
Antenna Possible values are: Both, Ant A,
Ant B
Note: From the front view of AP,
left is Ant A, right is Ant B
Both
RTS/CTS
Threshold
Request To Send/Clear To Send
mechanism is used in WLAN;
RTS/CTS threshold is
configurable; When a data
package size exceeds the
threshold, choose a setting within
a range of 0-2347. Suggestion: do
not modify the value
2347