User's Manual

48 Chapter 5 Web-based Configuration
Field Description Default Value
Trusted DHCP
Server1-3
Trusted DHCP
server settings,
total 3 servers
can be set
Description:
When DHCP Server is enabled
- When DHCP server is enabled, it allocates IP address to a
Client or AP through LAN port
- The subnet mask of DHCP Server IP address pool must be
less than the network mask used in LAN interface
- Able to allocate maximum of 1024 addresses from IP
address pool, including reserved addresses
When DHCP Relay is enabled
- Normally AP connects to remote DHCP server via WAN, in
this case, users must require a certificate for LAN
configuration
- Recommendation: When Relay is enabled, AP directly
connects to DHCP server
WAN Interface Configuration
Objective: