User's Manual

Chapter 3 Web-based Configuration Introduction 15
WA3001-S Access Point User Guide
Table 3 Configuration Description Table (WA6011)
Menu Bridge Mode Router Mode
Basic Config
Advanced Config
System Config
Statistic
Button Description
In the main configuration options window, there are two more buttons,
“Save” and “Reboot” available in the left panel of the logon screen, click
<Reboot> to re-start the AP.
The buttons shown in Figure 11 will appear during the configuration.
Figure 11 Buttons
• <Apply>: Press to apply a configuration changes. Some configurations
are applied only after saving and rebooting the AP. The corresponding
prompt window will pop up.
• <Refresh>: Press <Refresh> to refresh the interface.
• <Default>: Press <Default> to restore the default parameters.
For some parameter’s configuration, e.g. ESSID, click <Apply>, the system
will prompt that the configuration will be effective after save and reboot the
AP, see Figure 12