User's Manual

20 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
Figure 18 Configuration Completed
To obtain the IP Address for the WAN port by manually, select “No, I want
config it by myself” as shown in Figure 15, then click <next>, see Figure 19.
Figure 19 WAN Port Configuration
The AP default IP address for the WAN port is 192.168.1.1, Mask is
255.255.255.0, and the default Gateway is 0.0.0.0.
Click <next>, the system prompts the LAN port and Wireless port
configuration. Finally, click <finish>, the AP will save the configuration
changes and restart automatically.
• Configuration in Bridge Mode
Select “Bridge Mode” in Figure 14, the system will guide user how to
configure the IP address for LAN port, and the SSID and Channel for
wireless port. The details will not be described here because they are
included in the configurations in Route mode. Please refer to the
configuration steps in Router mode.