User's Manual

Chapter 4 Web-based Configuration 27
WA3001-S Access Point User Guide
Figure 31 PPPoE Configuration
Enter user name and password provided by the service provider. Click
<Connect> to dial up, when the dialup is successful, the <Disconnect>
button will be activated. Select “Auto-connect when boot” to automatically
connect after the AP is rebooted.
• Obtain address automatically using DHCP
Click “Obtain address automatically using DHCP”, see Figure 32. The WAN
IP address is automatically assigned to AP through DHCP server
Figure 32 Obtain Address Automatically Using DHCP
Click “DHCP Trusted Server”, see Figure 33.
Figure 33 Trusted DHCP Server Configuration