User's Manual

28 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
After the configuration of Trusted DHCP Server IP address, the AP will
obtain the WAN IP address from the configured Trusted DHCP Server only.
Click “Back to DHCP client” will return back to WAN interface configuration
window.
• Specify IP address:
Click “Specify IP address”, user can configure the WAN IP address manually
as shown in Figure 34. Click <Apply> to take the configuration effective.
Figure 34 Specify IP Address Manually
WAN Interface Configuration (WA6012)
WA6012 WAN interface configuration window is shown in Figure 35. It
contains “WAN Interface Status”, “ADSL Set” and “ADSL Firmware” options.
Figure 35 WAN Interface Configuration (WA6012)
• ADSL Configuration
- Reboot ADSL after Reconnection: ADSL module will get reboot
when ADSL re-connects every time
- VPI/VCI: VPI/VCI setting is same as what DSLAM setting is
- Network bridge WEP: llc bridged/vcmux bridged, the default is “llc
bridged”