User's Manual

Chapter 4 Web-based Configuration 29
WA3001-S Access Point User Guide
For the detailed configuration of “PPPoE”, “Obtain address automatically
using DHCP” and “Specify IP address”, please refer to “WAN Interface
Configuration (WA6011)” section.
• Figure 36 shows the ADSL firmware configuration
ADSL module upgrade or ADSL image files backup can be done through
“ADSL Firmware”.
Figure 36 ADSL Firmware Configuration
- Host IP address: Access AP host IP address
- Initialization File Name/Execution File Name: AP image files
Execute TFTP program and configure file path, click <Download> to start
ADSL module upgrade, or click <Upload> to backup ADSL image file.
ADSL Configuration (WA6012 in Bridge Mode)
WA6012 ADSL configuration in Bridge mode contains “ADSL config” and
“ADSL firmware” options, as shown in Figure 37
Figure 37 ADSL Configuration
LAN Interface Configuration
Click “LAN Interface”, the current LAN IP address and MAC address are
shown in Figure 38. Click <Apply> to take the IP address effective.