User's Manual

30 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
Figure 38 LAN Interface Configuration
Advanced Configuration
Wireless Port1 Configuration/Wireless Port2 Configuration
Click “Advanced Config/Wireless Port 1 Advanced Configuration”, see
Figure 39.
Figure 39 Wireless Port Advanced Configuration
Note: Same as the wireless basic configuration, the interface will
display “the wireless port cannot be used” when the wireless network card is
unplugged.
Table 5 Wireless Port Parameters Description
Parameters Specifications Default
Beacon Interval
Interval between Beacon
packets, the Beacon packet
contains network card
information, duration of
broadcast to the wireless
network.
100(ms)