User's Manual

34 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
 local-remote: implement the remote authentication after the
local authentication is failed.
 remote-local: implement the local authentication after the
remote authentication is failed.
- Encryption Mode: Choose either PAP or CHAP encryption mode.
- Max online user number: The range of the maximum number of
online users is 1-256.
• 802.1x Authentication Config: The configuration interface is shown in
Figure 44. Table 6 describes the configuration parameters’
specifications.
Figure 44 802.1x Authentication Configuration
Table 6 802.1x Authentication Config Parameter Specification
Parameter Specification Default
Server
timeout
Interval between retries of
sending a request frame
from AP to Server
(second). If within the
Timeout period the Server
doesn’t respond to the
AP’s request, the AP will
re-send the request frame.
Possible values: 1-65535
seconds.
30
Supplication
timeout
Interval between retries of
sending a request frame
from AP to Client
(second). If within the
Timeout period the Client
does not respond to the
AP’s request, the AP will
re-send the request frame.
Possible values: 1-65535
seconds.
30