User's Manual

Chapter 4 Web-based Configuration 39
WA3001-S Access Point User Guide
Figure 54 NAT/NAPT Configuration
IP Address mapping:
- Local IP address: IP address inside NAT interface
- Remote IP address: IP address outside NAT interface
Port mapping:
- Local IP address: Local IP address used for port mapping.
- External port: TCP port number used to differentiate the hosts
• NAT (Network Address Translation) advanced configuration is shown in
Figure 55.
Figure 55 NAT Advanced Configuration
NAT Address Pool:
- The starting IP address in NAT address pool: The first IP address of
an external network address pool, it is mapped to the internal
network by a way of dynamic address allocation.
- NAT Mask: the range of the address pool is defined by Mask and
the first IP address in the pool.
IP address mapping:
- Local IP address: IP address inside NAT interface.
- Remote IP address: IP address outside NAT interface.
Isolation & Filter Configuration
Click “Advanced Config/Isolation and Filter”, the configuration is shown in
Figure 56