User's Manual

40 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
Figure 56 Isolation and Filter Configuration
• Isolation
- Wired-wireless Isolation: Wired users and wireless users cannot
access with each other.
- Wired Isolation: Wired users cannot access with each other.
- Wireless Isolation: Wireless users cannot access with each other.
• Config broadcast limit: Configure the broadcast restriction, the range is
1-65535, the default value is 64.
• Load balance: Enable load balance in either “User based” or “Flux
based” mode.
Click <Apply> to take the configuration effect.
• Add a MAC address to the black list: Add a MAC address to the black
list, click <Add>, the user with this MAC address will then be blocked
from accessing the AP.
MAC Table Configuration
Click “Advanced Config/MAC Table”, the configuration interface is shown in
Figure 57.
Figure 57 MAC Table Configuration
• MAC age time: Configure the MAC address age time, the range is 10-
65535 seconds, the default is 300 seconds.