User's Manual
44 Chapter 4 Web-based Configuration
User Guide WA3001-S Access Point
- Read-write community Name: The default is “private”, 1-64
alphanumeric letters.
- The system name, location name and principle name can also be
configured, 0-255 alphanumeric letters.
SNMP End-user Filter
The maximum SNMP end-user can be configured is 4. The only configured
IP address can access AP through SNMP.
• SNMP trap host (Maximum number is 8)
The configuration interface is shown in Figure 63. There are totally 8 IP
addresses can be configured for alarm server. If no IP address was
configured for SNMP end-user, which means that all IP addresses can
access AP through SNMP.
Figure 63 SNMP Trap Configuration
File System Management
Click “Advanced Config/File System”, the configuration interface is shown in
Figure 64.
Figure 64 File System Configuration