User's Manual

Chapter 4 Web-based Configuration 45
WA3001-S Access Point User Guide
Erase Config File from AP: Click <Erase> to erase the current configuration
file from the AP; a dialog box will appear as shown in Figure 65. Click <OK>
and a message box will appear as shown in Figure 66. It prompts the
rebooting device and initiates the configuration erase.
Figure 65 Erase Configuration File Dialog Window
Figure 66 Reboot Message Dialog Window
For system file (including image and configuration file) management, specify
the host IP address, set the system file path and file name. Click <Start> to
start the download/upload AP Image or Config File.
Statistic Information
This section will introduce the system statistic information of AP
Wireless Port (WA6011)
Click “Statistic/Wireless Port”, the configuration user interface will be shown
in Figure 67.