User's Manual

52 Chapter 5 Typical Configuration Examples
User Guide WA3001-S Access Point
- The “Set wireless port” configuration window appears. Set SSID to
“AP123”, Channel to “1”.
- Click <next>, the popped up window below prompts the completion
of the configuration. Click <finish>, AP will reboot. The configuration
will be effective after rebooting.
Step 3: Set the WEP encryption for the AP
- Click “Basic Config/Wireless Port 1”, enable WEP encryption with
64-bit, select “Alphabetical” as a key format, enter “mykey” as the
key1 value