Specifications

Input Method
70
5.4 Letter
Switch to Letter input method; will be displayed at the lower left corner
of the screen.
1. Press - to enter the corresponding letter labelled on the
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears.
For example: if you press repeatedly, the following letters
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press to switch between upper and lower cases;
press the right soft key (Clear) to delete the letter
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter
share the same key, press the left soft key (Ok) or to remove
the underline, and then enter the next letter; or simply wait for one
second to input again. Press to confirm the current letter input
and enter a space.
3. Enter symbols and spaces: After the underline disappears, press
to display the symbol list. Press to highlight the intended symbol,
and then press the left soft key to enter the selected symbol.
Press to enter a space.
4. When no letter is underlined, press to move the cursor; press the
right soft key (Clear) to delete the character to the left of the
cursor; press and hold the right soft key (Clear) to delete all
characters; press to switch input methods.