_______________________________________ Copyright Statement: “© 2005 UTStarcom, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means without the prior written permission of UTStarcom, Inc.” Warranty Language: “The contents of this manual, whether in whole or in part, do not constitute any express or implied warranty with respect to any products of UTStarcom, Inc., or its affiliates.” Doc. Code: 8810026700.
Table of Contents SAFETY PRECAUTIONS.................................................... 1 1. GETTING STARTED ....................................................... 8 1.1 PACKAGE CONTENTS.....................................................................8 1.2 PHONE SPECIFICATIONS ................................................................9 1.3 HANDSET DESCRIPTION ...............................................................10 1.4 DISPLAY INDICATORS .................................................
. PHONEBOOK (NAMES) ............................................... 26 3.1 SEARCH ......................................................................................26 3.2 ADD ENTRY .................................................................................28 3.3 DELETE ......................................................................................30 3.3.1 One by One ...................................................................................30 3.3.2 All..............................
.6 GAMES .......................................................................................79 4.6.1 Sand Volleyball ..............................................................................79 4.6.2 Gobang..........................................................................................80 4.7 WIFI ...........................................................................................81 4.7.1 Net Search....................................................................................
Safety Precautions SAFETY PRECAUTIONS CE Declaration of Conformity For the following equipment: WiFi handset F3000 Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed.
Safety Precautions FCC RF Exposure Compliance This phone has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for the General Population/Uncontrolled exposure environment.
Safety Precautions Handling the Phone, Battery and Charger DANGER Only use the battery and charger specified for the phone. Failure to do so can result in damage to the phone, electric shock or fire. CAUTION Do not store or operate the phone or charger in hot, damp, or dusty areas, which can damage electrical and mechanical components. Avoid prolonged exposure to temperatures below 5°C or in excess of 35°C. DANGER Do not drop, shake or throw the phone or charger.
Safety Precautions Handling the Phone This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation This device has been designed to operate with the antennas listed below, and having a maximum gain of 3.44 dB. Antennas not included in this list or having a gain greater than 3.
Safety Precautions - Increase the separation between the phone and receiver Connect the phone into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Observe local regulations for specialized (hospital, aircraft, etc) when using the phone. areas Do not use the phone while operating a vehicle. CAUTION Changes or modifications not expressly approved by UTStarcom, Inc.
Safety Precautions Handling the Battery DANGER Do not dispose of the battery pack in a fire. It may explode. Check with local waste management codes for disposal instructions. Do not force the battery pack into the phone. Improper installation can cause malfunctions or damage the battery pack. This may result in fire or personal injury. Use caution in handling batteries in order not to short the battery on conductive materials such as rings, bracelets, and keys.
Safety Precautions Handling the Charger DANGER Only use a power source that provides the appropriate voltage (AC100~240 V) for the charger. An unsuitable power source can result in damage to the charger, fire or electric shock. Do not use the charger if the power supply cord or plug is damaged or frayed (exposed or broken wires, etc). This can result in the risk of fire or electric shock. Do not short circuit the charger connector jack. This may result in fire or electric shock.
Getting Started 1. GETTING STARTED 1.1 Package Contents Please check the package contents by comparing them with the following list. If you find anything missing or if the documentation set is incomplete, contact your local phone dealer immediately.
Getting Started 1.2 Phone Specifications Dimensions About 85 x 43 x 22 (L×W×H) mm Weight Approximately 90g Battery DC 3.7V 1100mAh Li-ion battery Charger Input: 100~240V AC, 50~60Hz Output: 5.
Getting Started 1.3 Handset Description 1. Earpiece 2. LCD Screen 3. Left Soft Key: This key is used to perform the function indicated on the screen above it.
Getting Started 4. Right Soft Key: This key is used to perform the function indicated on the screen above it. 5. Navigation Key: This key is used to scroll up and down through menu lists. 6. Talk Key: This key is used to make or receive a call. It can also be used to access outgoing call logs in standby mode. 7. Power Key: This key is used to switch the phone on and off, to end a call, or to return to standby mode. 8. ~ Number Keypad: These keys are used to enter numbers and characters. 9.
Getting Started 17. Earphone Socket 18. Speaker Note: This is only a brief introduction to the keypad functions. Please refer to the contents of this user manual for detailed descriptions and operations. 1.4 Display Indicators 1. Shows the current signal strength. The higher the bar, the stronger the signal. Strong 2. Weak Refers to the calling or connecting mode. 3. Indicates there are unread text messages. 4. Indicates the Alarm function is active.
Getting Started 5. (blue) Means the Ring Mode is set to Vibration; if the Ring Mode is set to Vibration And Ring or Ring After Vibration, will be displayed; if the Ring Mode is set to Mute, will be displayed. If the will be displayed. No Disturb function is active, If you press and hold the vibration shortcut key (green) will be displayed 6. 7. 8. in standby mode, Indicates there are unread voice mails. Indicates there are unread new emails. Indicates the battery charge level.
Getting Started If the phone is off, when you open the flip cover, the text “Charging…” is also displayed on the LCD screen. 3. When the battery indicator bar stops scrolling, charging is complete. The text “Fully Charged!” is also displayed on the LCD screen, if the phone is off.
Getting Started 2. Remove the battery. With the back of the phone facing you, press the release button and lift the battery off. 3. Install the new battery. Slide the new battery as illustrated until it locks into place. 1.
Getting Started Navigation key operations follow: Press the “Up”, “Down”, “Left”, and “Right” directions on the Navigation key to execute operations such as browsing, selecting, adjusting and setup; key directions are as follows: Up Up or Down Down Left Right Left or Right 1.8 Access Menu/List Options A variety of options are available for the menus and lists, such as: Menu and Names. For example, to access Menu Tools Alarm, follow the steps below: 1.
Basic Operations 2. BASIC OPERATIONS 2.1 Switch the Phone On/Off Press and hold the power key power-on/off animation. . The phone will display the If the PowerOn Code function is active, after switching on the phone, enter the security code (with each input displayed as *) and press the left soft key (Ok). If correct, the power-on animation will be displayed; otherwise Code Error will be displayed. 2.
Basic Operations Note: If the Repeat Dial on Busy function is active, the phone will enable you to automatically redial the last busy number that you tried to dial. After you dial a busy number, “Unconnected! Redial?” will be displayed. Press the left soft key (Ok); the phone will make automatic attempts to dial this number until it can be reached. 2.3 Use Speed Dial If you have assigned a phone number to one of the speed dial keys ~ , you can quickly call that phone number: 1.
Basic Operations To end an ongoing call, press the right soft key (Hangup) or the key, or close the flip cover 2.5 Reject a Call When there is an incoming call, press the right soft key (Hangup) or the key, or close the flip cover to reject the call If you press the right soft key (Hangup) to reject an incoming call, the call duration 00:00:00 will be displayed When there are missed calls (excluding rejected calls), the phone will (View) to enter prompt you.
Basic Operations 2.6.2 Call Waiting If the Call Waiting function is activated (refer to “Call Waiting” on page 92), when another call comes in during a call, the earpiece will sound a waiting tone.
Basic Operations soft key (Ok). Key in the third party’s phone number or find the number from the phonebook, and then press the left soft key (Call) key. When the connection succeeds, you can start the call or the with the third party. The original call will be placed on hold. The following operations are available: Press the left soft key (Option).
Basic Operations Press the key or close the flip cover to end both calls 2.6.5 Transfer a Call If the Call Transfer function is activated (refer to “Call Transfer” on page 92), you can transfer an ongoing call to another phone number: During a call, press the left soft key (Option). Press to (Ok). Press highlight Call Transfer and press the left soft key to highlight Blind or Consult and press the left soft key in the transfer number and press the left soft key (Ok). Key (Ok).
Basic Operations 2.6.7 Access the Phonebook While on a call, press the left soft key (Option). Press highlight Phonebook and press the left soft key phonebook entry list will be displayed. After entering the phonebook, press to (Ok). The to scroll through the entries.
Basic Operations 2.7 Store a Phone Number In standby mode, a phone number added to the phonebook. 1. Enter the desired phone number and press the left soft key (Option). 2. Select Save. 3. Select New Contact or Update Contact. - New Contact: Select this option to add a new entry with the entered phone number. Follow the prompts to edit phone numbers, the name, group category or email address - Update Contact: Select this option to modify an existing entry with the entered phone number.
Basic Operations 2.9 Custom Functions Shortcut 1. In standby mode, press to access the custom functions menu. 2. Press to highlight the desired option: Scheme (1), Inbox (2), WiFi (3), Games (4), Edit Message (5), Network (6), Calculator (7), Calendar (8) or Misc (9), and then press the left soft key access the option. (Ok) to You can also access an option by pressing its corresponding number key. 2.10 Profiles Shortcut In standby mode, press to access the Profiles menu.
Phonebook (Names) 3. PHONEBOOK (NAMES) You can store frequently used phone numbers and names in the phone memory (phonebook). The phonebook can store up to 200 entries. Each entry may contain a name, a group category, three phone numbers and an email address.
Phonebook (Names) 2. The letter/digit just entered will be underlined. After you have entered the intended letter/digit, press the appropriate number key to input the next letter/digit. If the next letter/digit and current letter/digit share the same key, wait for one second to input the letter/digit again. To delete the last entered letter/digit, press the right soft key (Clear); to delete all letters/digits, press and hold the right soft key (Clear).
Phonebook (Names) 3.1.2 Del Contact After this option is selected, “Delete?” will be displayed. Press the left soft key (Ok) to confirm the deletion. 3.1.3 Group Members This option is available only when the selected item is the group category. Select this option to view the list of entries in this group category. 3.1.4 Call This option is available only when the selected item is a phone number. Select this option to call the selected phone number. 3.1.
Phonebook (Names) You can enter a maximum of 20 alphanumeric characters or 10 Chinese characters (refer to “Input Method” on page 98). 2. Select group category: Press to highlight the item next to the name, and then press the left soft key (Ok). Press to highlight the desired group category: Common, Business, Family, Friend, Others or Blacklist, and press the left soft key 3. Edit phone number(s): Press to highlight the item, and then press the left soft key (Ok).
Phonebook (Names) Details of the newly added record cannot be identical to those of an existing record. Otherwise, the text Exists will be displayed when you press the left soft key (Ok) in step 5 The phone will automatically reject any incoming caller whose number is on the Blacklist. No response will be displayed. No more entries can be added if the phonebook memory is full. When Add Entry is selected, the phone will remind you that the phonebook memory is full 3.
Phonebook (Names) 3.4 Group Info Names Group Info to highlight the desired group After accessing this option, press category: Common, Business, Family, Friend, Others or Blacklist, and press the left soft key options: (Ok). Then, you can select from the following 3.4.1 Ring Tone Select this option to specify a ring tone for the particular group category. After accessing this option, you can select: Local Rings: To select from built-in melodies.
Phonebook (Names) Enter the first letter(s)/digit(s) of the desired entry (name). Press to (Detail) to view the highlight the entry, and press the left soft key details for the entry. For detailed operations, see “Search”. The only difference is that, when you select the group category and press the left soft key (Option), the Group Members option will not be available. 3.
Phonebook (Names) number) will be displayed. To change or cancel the setting for this key, press the left soft key (Ok), and then select Edit or Cancel Note: If the record for a speed dial key is modified in the phonebook, it will automatically be updated for the speed dial key function. If the record for a speed dial key is deleted from the phonebook, it will also be cancelled for the speed dial key function. 3.
Menu -> Messages 4. MENU In standby mode, press the left soft key Press (Menu) to access the menu. to reach the desired submenu, and press the left soft key (Ok) to access the submenu. 4.1 Messages Menu Message From this submenu, you can read, edit, save and send text messages and emails. 4.1.1 Text Message Menu Messages Text Message Select this option to read, edit, save and send text messages. 4.1.1.
Menu -> Messages Send After selecting this option, you can send the message in either of the following ways: Key in the receiver’s phone number, and press the left soft key (Send) to send the message Press the left soft key (Contact) to access the phonebook entry list. Enter the first letter(s)/digit(s) of the intended entry (name). Press to highlight the entry and press the left soft key (Detail). If the entry contains only one phone number, the corresponding phone number will be displayed.
Menu -> Messages displayed. You can press the left soft key oldest message (Ok) to overwrite the Note: In standby mode, you can send a text message by entering the phone number, pressing the left soft key (Option) and selecting Send Message. Then, follow the prompts to edit the message. 4.1.1.2 Inbox Menu Messages Text Message Inbox When a new message is received, the message tone will sound, and the indicator will be displayed.
Menu -> Messages Reply Select this option to reply to the message. The steps to reply to a text message are similar to those for “Edit Message” on page 34. The only difference is that, when you select Send, the sender’s phone number will be displayed automatically. You can edit the phone number, and press the left soft key (Send) to send the reply. Forward After accessing this option, you can edit and forward the message. The steps to forward a message are the same to those for “Edit Message” on page 34.
Menu -> Messages Call Back Select this option to call the sender’s phone number. Pick Up This option is available only when the message contains numbers or email addresses. After you access this option, the numbers and/or email addresses will be extracted from the message contents and listed. Press to highlight the desired phone number or email address, and then press the left soft key (Ok). You can edit the phone number or email address. (While editing a phone number, you can press call the number.
Menu -> Messages Messages are listed chronologically; the most recent message sent is highlighted at the top of the list. Press to reach the desired message and press the left soft key (Read). Press to view the message contents and details (the receiver and sending time). Press the left soft key to view other messages. Press (Option) to select from the following options: Delete Select this option to delete the message. When you access this option, “Delete?” will be displayed.
Menu -> Messages (Read) to read it. Press to view the message contents. Press to view other draft messages. While reading the message, you can press the left soft key and select from the following options: (Option) Edit Select this option to edit the draft message. Refer to “Edit Message” on page 34 for details. Send Select this option to send the draft message. Refer to “Send” under the Edit Message option on page 35 for details. Delete Select this option to delete the draft message.
Menu -> Messages the message service center will store the message. You can set the duration of time that sent text messages can be stored in the message service center. After accessing this option, select 12 Hours, One Day, One Week or Max Period. SMS Report If the SMS Report function is active, when a text message has been successfully sent, the phone will receive a notification. After accessing this option, select On or Off to activate or deactivate this function. 4.1.1.
Menu -> Messages - Press the left soft key (Contact) to access the phonebook entry list. Enter the first letter(s)/digit(s) of the intended entry (name). to highlight the entry and press the left soft key Press (Detail) to display the entry details, with the email address highlighted.
Menu -> Messages to view other pictures. When the desired picture is displayed, press the left soft key (Ok) to confirm to scroll through the melodies and listen to - Ring Tone: Press a sample of each. After highlighting the desired melody, press the left soft key 4. Edit contents: Press (Ok) to confirm to highlight the Content item and press the left soft key (Edit).
Menu -> Messages If there are no emails in the Inbox, when you select Inbox, Empty will be displayed Press key to scroll to the intended email, and then press the left soft (Read). Press to view the email contents and details. Press to view other emails. Press the left soft key to select from the following options: (Option) Reply Select this option to reply to the email to the sender. The operations are similar to those for “Edit Email” on page 41.
Menu -> Messages Delete All Select this option to delete all email in the Inbox. When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion. View Receivers After you access this option, all receivers’ email addresses or names (if stored in the phonebook) will be listed. Press to highlight the desired email address or name, and then press the left soft key select: (Option) to Send Email: To send an email to the email address.
Menu -> Messages 4.1.2.3 Outbox Menu Messages Email Outbox The last 10 emails you have sent are stored in the Outbox. When Outbox is selected, the sent email list will be displayed (if there are no emails in the Outbox, Empty will be displayed). The list shows the receivers’ email addresses or names (if stored in the phonebook). Press to reach the desired email and press the left soft key to view the email contents and details. Press (Read). Press view other emails.
Menu -> Messages stored in the phonebook) will be listed. Press to highlight the desired email address or name, and then press the left soft key select: (Option) to Send Email: To send an email to the email address. Refer to “Edit Email” on page 41 for detailed operations Update Contact: To modify an existing phonebook entry with the email address. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Menu -> Messages Send Select this option to send the email. Edit Select this option to edit the selected item. Delete Select this option to delete the draft email. When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion. Delete All Select this option to delete all emails in the Draft. When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion. Save Select this option save the email. 4.1.2.
Menu -> Messages After accessing this option, press the left soft key box name and press the left soft key operation. (Edit). Edit the (Ok) to complete the Email Address Select this option to set the email address for the email box. If no email address has been specified for the email box, the email address editing screen will be displayed after you select this option. Otherwise, the original email address will be displayed.
Menu -> Messages number and press the left soft key (Ok) to complete the operation. Incoming Server Select this option to set the incoming mail server (POP3) for the email box. After accessing this option, follow the prompts to edit the POP3 server address and press the left soft key (Ok). Edit the POP3 server port number and press the left soft key (Ok) to complete the operation. Enable/Stop Select Enable or Stop to activate or deactivate the email box.
Menu -> Call Log 4.2 Call Log Menu Call Log Your phone records missed, received and dialed calls as well as their call durations. In standby mode, you can press , or to quickly access Missed Log, Received Log or Dialed Log (refer to page 24 “Call Log Shortcut”). 4.2.1 Missed Log Menu Call Log Missed Log This option enables you to view the last 20 missed calls.
Menu -> Call Log If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key to highlight the desired number and press (Call) or the key to call the number After reaching the desired log, press the left soft key following options will be available: (Option). The 4.2.1.1 View Select this option to view details of the selected call log, including the caller’s number and calling date/time of each missed call from this caller.
Menu -> Call Log the left soft key mode (Ok) to access the selected number’s editing You can edit the phone number, and then save or dial the edited number: Save Number After editing the number, press the left soft key Contact or Update Contact. (Save). Select New New Contact: Select this option to add a new phonebook entry with the phone number.
Menu -> Call Log 4.2.1.4 Delete Select this option to delete the selected call log. When you access this option, “Delete?” will be displayed. Press the left soft key complete the deletion. (Ok) to 4.2.1.5 Delete All Select this option to delete all missed call logs. Follow the prompts to enter the security code and press the left soft key the deletion. (Ok) to complete 4.2.2 Received Log Menu Call Log Received Log This option enables you to view the last 20 received calls.
Menu -> Call Log If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key to highlight the desired number and press (Call) or the key to call the number After reaching the desired log, press the left soft key following options will be available: (Option). The 4.2.2.1 View Select this option to view details of the selected call log, including the caller’s number, calling date/time of each received call from this caller and duration of each call.
Menu -> Call Log the left soft key mode (Ok) to access the selected number’s editing You can edit the phone number, and then save or dial the edited number: Save Number After editing the number, press the left soft key Contact or Update Contact. (Save). Select New New Contact: Select this option to add a new phonebook entry with the phone number.
Menu -> Call Log 4.2.2.4 Delete Select this option to delete the selected call log. When you access this option, “Delete?” will be displayed. Press the left soft key complete the deletion. (Ok) to 4.2.2.5 Delete All Select this option to delete all received call logs. Follow the prompts to enter the security code and press the left soft key the deletion. (Ok) to complete 4.2.3 Dialed log Menu Call Log Dialed Log This option enables you to view the last 20 dialed calls.
Menu -> Call Log following options will be available: 4.2.3.1 View Select this option to view details of the selected call log, including the dialed number, calling date/time of each call and duration of each call. If the call log contains only one phone number, details of the call log will be displayed immediately If the call log contains more than one phone number, phone numbers will be listed.
Menu -> Call Log Save Number After editing the number, press the left soft key Contact or Update Contact. (Save). Select New New Contact: Select this option to add a new phonebook entry with the phone number. Follow the prompts to edit phone numbers, the name, group category or email address Update Contact: Select this option to modify an existing phonebook entry with the phone number. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Menu -> Call Log 4.2.3.5 Delete All Select this option to delete all dialed call logs. Follow the prompts to enter the security code and press the left soft key deletion. (Ok) to complete the 4.2.4 Duration Menu Call Log Duration This option enables you to view the approximate duration of the last call, all received calls, all dialed calls, or the duration of all calls.
Menu -> Profiles 4.3 Profiles Menu Profiles This submenu enables you to customize the phone alert settings to suit a variety of environments. When you access this submenu, the profile list will be displayed; the current profile will be highlighted. You can customize each profile, and activate the one that suits your environment. The phone will utilize all the current profile’s settings. In standby mode, you can press submenu. to quickly access the Profiles Standard is the factory-preset profile. 4.3.
Menu -> Profiles Press or to increase the volume; press or to decrease the volume. As you scroll through the volume levels, a sample of each will sound. After reaching the desired volume level, press the left soft key (Ok) to complete the operation. Ring Mode This function enables you to define how the phone will notify you of incoming calls, new messages, memo alert and the alarm clock.
Menu -> Profiles Message Tone Select this option to specify the incoming message alert tone. Press to scroll through the message tones and listen to a sample of each. After highlighting the desired message tone, press the left soft key to complete the operation. (Ok) Alarm Tone This option enables you to select an alarm tone for the alarm clock. After accessing this option, you can select: Local Rings: To set a built-in melody as alarm tone.
Menu -> Profiles Downloading Rings: To set a downloaded melody as memo alert tone. Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key (Option). Select Set as Ring Tone to specify the downloaded melody; select Delete to delete the downloaded melody Keypad Tone Select this option to set the tone the phone sounds when you press the phone’s keys. Three options are available: Standard Keytone, Key Music and Off.
Menu -> Profiles 4.3.2 Meeting Menu Profiles Meeting This profile is suitable for meeting environments. You can preset this option to meet your needs by following the same steps specified in “Standard”. 4.3.3 Outdoor Menu Profiles Outdoor This profile is suitable for outdoor environments. You can preset this option to meet your needs by following the same steps specified in “Standard”. 4.3.4 User Define Menu Profiles User Define This profile can be tailored for other environments.
Menu -> Settings 4.4 Settings Menu Settings From this submenu, you can perform various phone settings. 4.4.1 Date/Time Menu Settings Date/Time This option enables you to perform date and time settings for the phone. 4.4.1.1 Date/Time Menu Settings Date/Time Date/Time Select this option to set the phone’s date and time. After accessing the option, enter a date from 2004-01-01 to 2019-12-31, and then enter the time in the corresponding time format.
Menu -> Settings 4.4.1.3 Date Format Menu Settings Date/Time Date Format This option enables you to set the date format. After accessing this option, select Day/Month/Year, Month/Day/Year or Year/Month/Day. 4.4.2 Display Menu Settings Display You may set the display for the LCD screen as follows: 4.4.2.1 Scheme Menu Settings Display Scheme This option enables you to select the picture display in standby mode.
Menu -> Settings 4.4.2.2 Greetings Menu Settings Display Greetings This option enables you to set the phone’s greetings, which will be briefly displayed each time the phone is switched on. After accessing this option, edit the greetings (16 alphanumeric characters or 8 Chinese characters) and then press the left soft key (Ok) to complete the operation. 4.4.2.3 Backlight Menu Settings Display Backlight The LCD screen and keypad will light when you press keys or the phone receives a call or message.
Menu -> Settings 4.4.3.1 Answer Mode Menu Settings Set Handset Answer Mode This option enables you to select how to answer an incoming call. After you access this option, the following will be available: Talk Key Press the left soft key incoming call. (Answer) or the key to answer an Any Key Press any key to answer an incoming call except the right soft key key and the the , key. Flip Key Flip open the phone to answer an incoming call.
Menu -> Settings calls. After accessing this option, select Enable or Disable to activate or deactivate. 4.4.4 Set Security Menu Settings Set Security This option enables you to set the security level to protect your phone. After accessing this option, you will be prompted to enter the user definable security code (i.e. password). Key in the security code and (Ok). If correct, the following options will be press the left soft key available (otherwise Failed will be displayed).
Menu -> Settings If the new security code entered in step 3 is different from that entered in step 1, when you press the left soft key will be displayed (Ok), Not Matched To avoid any inconvenience, please remember the new security code 4.4.4.3 Reset All Select this option to restore your phone’s default settings. When you access this option, “Reset All?” will be displayed. Press the left soft key (Ok) to complete the operation. This operation will not delete the phonebook entries or call logs.
Menu -> Settings Functions Default Settings Earphone Auto Answer Disable Security Code 888888 PowerOn Code Disable Alarm (On/Off) Off Alarm (Set Time) 08:00 Alarm (Snooze) Off Alarm (Set Cycle) Once Sand Volleyball (Game Level) Beginner Gobang (Game Mode) White Chess Profiles Default Settings Profile Options Standard Meeting Ring Volume 4 0 4 4 Ring Mode Ringing Vibration Ringing Ringing Ring Tone Ring Tone 6 Ring Tone 6 Ring Tone 6 Ring Tone 6 Message Tone Ring Tone 1
Menu -> Tools 4.5 Tools Menu Tools From this submenu, you can set the Alarm, view the Calendar, set memos, use the Calculator or change the current Time Zone. 4.5.1 Alarm Menu Tools Alarm This function enables you to set the alarm for a specified time. Once will be displayed. activated, the alarm indicator When the preset alarm time expires, the phone will sound the alarm; an alarm icon and the current time will be displayed.
Menu -> Tools The cursor will advance if the number entered is valid; otherwise, the phone will sound an error tone (if the Keypad Tone is not set to Off) 4.5.1.3 Snooze Menu Tools Alarm Snooze If this function is activated, the alarm will repeat 3 times at 5-minute intervals after the original alarm time expires. You can select On or Off to activate or deactivate this function. 4.5.1.4 Set Cycle Menu Tools Alarm Set Cycle This option enables you to set the alarm cycle period.
Menu -> Tools 4.5.2 Calendar Menu Tools Calendar This function enables you to view the calendar and set up to 10 memos. In standby mode, if the memo time expires, the memo details will be displayed; the memo alert will sound (if the memo alert tone is activated). Press any key to return to standby mode. After you access this option, the calendar will be displayed with the current date highlighted. The dates marked red indicates there are memos specified for these days.
Menu -> Tools 2. Enter a date from 2004-01-01 to 2019-12-31, and then enter the time in 24-hour format. Press the left soft key (Ok). - The date and time of the newly added memo cannot be identical to those of an existing memo. Otherwise, Time Overlap will be displayed when you press the left soft key (Ok) - If the entered date and time is earlier than the phone’s current date and time, Time Passed will be displayed when you press the left soft key (Ok).
Menu -> Tools All When you access this option, the prompt Enter Code will be displayed. (Ok). If the code Enter the security code, and press the left soft key is correct, all memos will be deleted; otherwise Code Error will be displayed. 4.5.3 Calculator Menu Tools Calculator This function enables you to add, subtract, multiply and divide. 1. The screen will initially display the number “0”. Enter the first number to be calculated.
Menu -> Tools If the formula violates mathematical principles (for example, 5/0), Error will be displayed If the absolute value of the calculation result exceeds 999,999,999, Overflow will be displayed 4.5.4 Time Zone Menu Tools Time Zone This option enables you to view the time of some cities in different time zones in the world. After you access this option, the phone’s current time zone and city will be displayed, as well as the current date and time. Press time zones; press displayed time zone.
Menu -> Games 4.6 Games Menu Games There are two games available: Sand Volleyball and Gobang. 4.6.1 Sand Volleyball Menu Games Sand Volleyball Every time the ball drops into the opponent’s side, one point is won. The player with seven points wins one bout. The player who wins three bouts is the winner. To jump, press press or , , , or , , or . To move leftwards, . To move rightwards, press . To pause or continue, press the left soft key key.
Menu -> Games 4.6.1.3 Game Rule Select this option to view the rules of the game. Press though the rules. to scroll 4.6.2 Gobang Menu Games Gobang The object of the game is to line up five of your chess pieces horizontally, vertically or diagonally, and to block your opponent. The player lining up five pieces first is the winner. To move upwards, downwards, leftwards or rightwards, press , , or . To place a piece, press the left soft key .
Menu -> WiFi 4.7 WiFi Menu WiFi From this submenu, you can perform the following WiFi settings. Note: After completing WiFi settings, switch the phone off and then on, to apply the changed WiFi settings. 4.7.1 Net Search Menu WiFi Net Search This option enables you to search available APs (10 maximum) for the phone. APs can be defined and saved using the Net Search feature if APs have broadcast turned on and the phone is within their ranges.
Menu -> WiFi “AP Profile” on page 82) 4.7.2 WiFi Config Menu WiFi WiFi Config From this option, you can perform the following WiFi configuration: 4.7.2.1 AP Profile Menu WiFi WiFi Config AP Profile This option enables you to set up to four AP (Access Point) profiles. Each time you switch on the phone, the phone will try to connect to one of these APs according to their respective profile settings. After you select this option, the AP profile list will be displayed.
Menu -> WiFi After accessing this option, select Open AP, WEP KEY or WPA-PSK: If WEP KEY is selected, the phone will then display the options of WEP Key Info (refer to “WEP Key Info”) If WPA-PSK is selected, the phone will then display the PSK-editing screen (refer to “WPA-PSK Info”) WEP Key Info If the AP profile’s security mode is set to WEP Key, select this option to set the WEP key. After accessing this option, observe the following operations: 1. Select Auth.
Menu -> WiFi After accessing this option, enter the WPA-PSK key and press the left soft (Ok) to complete the operation. key Ensure that the WPA-PSK key consists of 8-63 ASCII characters or 64 hexadecimal characters Activate Select this option to connect to the AP according to the AP profile setting. If the connection fails, the phone will try to connect to other AP profiles’ APs.
Menu -> WiFi 4.7.3.1 DHCP Menu WiFi Network Parameter DHCP If the DHCP function is active, the phone will obtain an IP address automatically from the DHCP server. After accessing this option, select Disable or Enable to disable or enable DHCP. 4.7.3.2 IP Menu WiFi Network Parameter IP This option enables you to perform IP settings. Note: Only when DHCP is disabled, can the IP option be available. Otherwise, when you select this option, Please Disable DHCP will be displayed.
Menu -> WiFi left soft key (Ok) to complete the operation. 4.7.3.3 DNS Menu WiFi Network Parameter DNS This option enables you to perform DNS settings. Primary DNS Server IP Address Select this option to set the IP address of the local primary DNS server. After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation. Secondary DNS Server IP Address Select this option to set the IP address of the local secondary DNS server.
Menu -> WiFi 4.7.4 Signal Protocol Menu WiFi Signal Protocol From this option, you can set signal protocols: 4.7.4.1 SIP Menu WiFi Signal Protocol SIP This option enables you to configure up to three sets of SIP protocol settings.
Menu -> WiFi SIP Register Server Port Select this option to set the SIP register server port. After accessing this option, key in the port number, and press the left soft key (Ok) to complete the operation. SIP Outbound Proxy Select this option to set the SIP outbound proxy. After accessing this option, you can select IP or DNS. SIP Outbound Server Domain Name Select this option to set the SIP outbound server domain name.
Menu -> WiFi After accessing this option, enter the user name (1~32 alphanumeric characters), and press the left soft key operation. (Ok) to complete the SIP Authentication String Select this option to set the SIP authentication string. After accessing this option, enter the authentication string, and press the (Ok) to complete the operation. left soft key SIP Password Select this option to set the SIP password.
Menu -> WiFi RTP Port This option enables you to set the RTP port. After accessing this option, key in the RTP port number (10000~20000), and press the left soft key (Ok) to complete the operation. The port number should range from 10000 to 20000; otherwise Failed will be displayed 4.7.4.3 NAT Menu WiFi Signal Protocol NAT Select this option to set the NAT protocol.
Menu -> WiFi 4.7.4.4 Voice Mail Menu WiFi Signal Protocol Voice Mail This option enables you to perform voice mail settings. After you access this option, the Voice Mail Access Number option will be displayed: Voice Mail Access Number Select this option to set the voice mail access number. After accessing this option, key in the access number, and press the left soft key (Ok) to complete the operation. Note: Pressing and holding voice mail access number.
Menu -> Network 4.8 Network Menu Network From this submenu, you can set the following network services: 4.8.1 Call Waiting Menu Network Call Waiting This option enables you to set the Call Waiting function. 4.8.1.1 Per Call Basis Menu Network Call Waiting Per Call Basis Select Enable or Disable to activate or deactivate the per call basis Call Waiting function. 4.8.2 Call Transfer Menu Network Call Transfer If the call transfer function is active, you can transfer an ongoing call to another phone number.
Menu -> Network 4.8.2.3 Consult Menu Network Call Transfer Consult If this option is selected, you need to announce the transfer after the transferred-to party answers your call. Then, press the left soft key (Transfer) to transfer the intended call. 4.8.2.4 Blind & Consult Menu Network Call Transfer Blind & Consult Select this option to activate both Blind and Consult Call Transfer functions. 4.8.
Menu -> Network After accessing this option, select On or Off to activate or deactivate this function. 4.8.6 Repeat Dial on Busy Menu Network Repeat Dial on Busy If this function is active, the phone will enable you to automatically redial the last busy number that you tried to dial. After accessing this option, select On or Off to activate or deactivate this function. 4.8.
Menu -> Misc 4.9 Misc Menu Misc From this submenu, you can perform the following operations: 4.9.1 Vendor Information Menu Misc Vendor Information Select this option to view the vendor information. Press to browse through the information: Vendor Name, Enterprise Code, Model Name and Version. 4.9.2 PC Config Menu Misc PC Config This option enables you to download WiFi setting parameters from a PC to the phone. When the operation is complete, restart the phone 4.9.
Menu -> Misc 4.9.4 Remote TFTP Server Menu Misc Remote TFTP Server This option enables you to set the remote TFTP server. After accessing this option, key in the domain name of the remote TFTP server, and press the left soft key (Ok) to complete the operation. 4.9.5 Local TFTP Update Menu Misc Local TFTP Update This option enables you to perform local TFTP update. After accessing this option, follow the prompt to enter the security code and press the left soft key (Ok).
Menu -> Misc 4.9.7 Web Authentication Menu Misc Web Authentication Set this option when you use the phone in an area that requires web authentication. After you access this option, the following will be available: 4.9.7.1 Set Address Select this option to set the effective URL for script download After accessing this option, key in the URL, and press the left soft key (Ok) to complete the operation 4.9.7.2 Download Script Select this option to initiate script download.
Input Method 5. INPUT METHOD This phone supports five input methods, including English, Letter, PinYin, Stroke and Digit in order to provide easy input for letters and digits in text editing mode. 5.1 Switch Input Method In text-editing mode, press to switch between the input methods. The current input method indicator will be displayed at the upper right side of the screen and include: Input Method Indicator English Letter PinYin Stroke Digit 5.
Input Method - When you enter the first letter of any English word, “*” will be displayed (except and ). As you input letters, the phone will automatically associate the matched English words - If the letter input does not correspond with any English word in the phone’s dictionary, this key press will have no response - Press the right soft key from right to left (Clear) repeatedly to delete letters 2.
Input Method For example: if you press appear in turn: repeatedly, the following letters - The letter just entered will be underlined. When the letter is underlined, press to switch between upper and lower cases; press the right soft key (Clear) to delete the letter 2. After you have entered the intended letter, press any other key on the keypad to input the next letter.
Input Method 5.6 Symbols In text-editing mode, if the current input method is not Digit, you can enter symbols by observing the following steps: 1. When the word selection column is empty or when no letter is underlined, press to display the symbol list. 2. Press to display the intended symbol. Press the corresponding number key to enter the desired symbol.
Troubleshooting 6. TROUBLESHOOTING When using this phone, if you run into malfunctions, please refer to the following troubleshooting techniques before requesting help: Symptom The phone cannot be switched on Cannot make calls No ring Strong interference noise during call; 102 Diagnosis Solution Have you pressed and held it for more than 2 seconds? Press and hold for more than 2 seconds. Is the battery low? Charge the battery.
Troubleshooting Symptom or call interrupted Diagnosis Solution Is there data download via the AP, which affects your phone’s signal quality? Connect to another AP or stop the data download. Is the charger properly connected to the phone? Connect the charger and phone correctly. Is the charger connected to a 100-240V AC wall outlet? Connect the charger to a 100-240V AC wall outlet correctly.
