User manual

3. Connecting to a Wireless Network
Page 7
Page 8
For alpha entry, rapidly press a key to toggle through the
letters assigned to that key. For example, enters a, b,
c, A, B, and C. Rapidly press to toggle through the
entries. Therefore, to enter B, rapidly press five times.
Pause between key presses to enter the next character in
the string. For example, to enter the string "ab", press
once, pause then rapidly press twice.
If you want to change something previously entered, press
(Clear) to delete the character to the left of the cursor;
press and hold (Clear) to delete all characters. Press
to move the cursor.
An indicator ( or ) appears at
the upper right corner of the screen.
indicates Alpha entry;
indicates numeric entry.
Press to switch between
and .
For numeric entry, press the desired
key once.
3. Connecting to a Wireless Network
Page 8
You can enter alpha and numeric values, such as a WEP
Key, using the F3000 phone keys.
If the desired AP has broadcast turned off, you can save the
AP by entering SSID information directly.
1. Press (Menu); press to scroll to WiFi and
press (Ok); press to select WiFi Config; press
to select AP Profile.
2. Press to reach the desired AP profile and press
(Ok). Press to select the SSID option.
3. Enter the desired AP's SSID and press (Ok).
4. Follow steps 3-4 specified in Section 3.3.1.
3.4 Tips for Alphanumeric Entry
3.3.2 Entering SSIDs Directly
4. Auto-Provisioning of F3000 WiFi
Phone
If there are new configuration and software updates available,
once the phone has connected to the Internet successfully via
the Access Point, the F3000 will need to be provisioned with the
latest configuration and software. This process is automatic and
will take several minutes to complete. During this time, several
status messages such as downloading, decompressing will be
displayed on the phone's display. Once complete, the phone will
reboot.
After auto-provisioning, the phone will use the same process as
previously described for connecting to Access Points.