Please Read Before Proceeding Trademarks Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, ActiveSync, Excel, Internet Explorer, MSN, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks are the properties of their respective owners. THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
Important Safety Precautions When using this product, the safety precautions below must be taken to offset possible legal liabilities and damages. ELECTRICAL SAFETY This product is intended for use when supplied with power from the battery. Other usage may be dangerous and will invalidate any approval given to this product.
Contents Chapter 1 Getting Started 1.1 Getting to Know your Device and its Accessories ...................................8 1.2 Battery Information ...................................................................................13 1.3 Starting Up .................................................................................................14 1.4 The Today Screen ......................................................................................17 1.5 Using the Start Menu...................
Chapter 3 Using Phone Features 3.1 Using the Phone ........................................................................................36 3.2 Making a Call .............................................................................................37 3.3 Receiving a Call .........................................................................................39 3.4 In-Call Options ...........................................................................................40 3.
Chapter 6 Getting Connected 6.1 Connecting to the Internet ........................................................................69 6.2 Internet Explorer Mobile ...........................................................................71 6.3 Using Bluetooth .........................................................................................73 6.4 Using Wireless Modem .............................................................................78 6.5 Using Comm Manager ......................
Chapter 9 Using Other Applications 9.1 Word Mobile .............................................................................................128 9.2 Excel Mobile .............................................................................................130 9.3 Viewing Slide Shows with PowerPoint Mobile .....................................132 9.4 Using Voice Speed Dial ...........................................................................133 Appendix A.1 Regulatory Notices ................
Chapter 1 Getting Started 1.1 Getting to Know your Device and its Accessories 1.2 Battery Information 1.3 Starting Up 1.4 The Today Screen 1.
1.
1 POWER/Backlight Button Press to turn your device on or off. Press and hold to turn the backlight on or off. 2 MiniSD Card Slot Insert a storage card (MiniSD) for storing data. 3 Antenna 4 Notification LED 1 Bi-color LED on the left side: Blue and Green for Bluetooth system notification of powered-up and ready to transmit radio frequency signal, and Wi-Fi status.
Back, bottom, and right view 1 2 3 4 5 10 6 7 8 9 10 | Getting Started
1 Stylus and Stylus Slot Use the stylus to write, draw, or select items on the touch screen. 2 Flash Allows you to capture images even in a dark environment. To turn on the flash, tap the Flash icon ( ) when in Camera mode. 3 Camera Lens The camera lens on your device supports two shoot modes: Wideangle mode (normal) and Macro mode (close-up). To change the shoot mode, push the switch up for wide-angle mode ( ) or down for macro mode ( ).
The QWERTY keyboard Your device provides you with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To use the hardware keyboard, slide the main screen rightward to reveal the keyboard. The screen orientation will change to landscape when the keyboard is revealed. You can do the following with the hardware keyboard: 12 • To type lowercase letters, press the keys using your thumbs or fingers.
1.2 Battery Information Your device contains a rechargeable Li-ion polymer battery. Your device is designed to use only manufacturer-specified original batteries and accessories.
Low battery When the low-battery warning appears, do the following: 1. Immediately save your current data. 2. Synchronize with your PC. 3. Turn off your device. To check the battery power • Tap Start > Settings > System tab > Power; or, • Tap the Battery icon ( ) on the Today screen. 1.3 Starting Up Turn the device on and off To turn on the device, press the POWER button. When you turn on the device for the first time, you are asked to complete a calibration process.
Calibrate the Device Calibrating the device screen involves tapping with the stylus the center of a cross as it moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated. If your device does not accurately respond to screen taps, please follow these steps to re-calibrate it: 1. Tap Start > Settings > System tab > Screen. 2. On the General tab, tap Align Screen, and follow the instructions on the screen.
Manage screen settings The device touch screen has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs on your device, while Landscape mode may be optimal for viewing longer text files. • To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want: Portrait, Landscape (right-handed), or Landscape (left-handed).
1.4 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. • To access the Today screen, tap Start > Today. • To customize the Today screen display, including the background image, tap Start > Settings > Personal tab > Today. 1 2 3 4 5 6 7 8 9 10 15 14 13 11 Note 12 1 Tap to open the Start menu. 2 Tap to view connectivity status.
Indicators The following are some of the status icons that you may see on your device. Icon Description Indicates the battery is fully charged. lndicates the battery is very low. Battery charging. Sound on. Sound off. Ringer in vibration mode. 1x data connection is active. EVDO data connection is active. ActiveSync connection is active. ActiveSync connection is not active. Synchronization in progress. Synchronization error. Indicates maximum signal strength. No signal. Flight mode is active.
Icon Description New e-mail or text messages New voice mail Device is locked. indicates the device is unlocked. Indicates any of wireless functions (Phone, Bluetooth, Wi-Fi) are turned ON. indicates the three features are turned OFF. Indicates the display mode as Portrait mode. / indicates the Landscape mode. 1.5 Using the Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. It lets you close a screen and switch from one program to another.
Indicators The following are some of the icons for the programs that are already installed on your device. Icon Description ActiveSync Synchronizes information between your device and a PC. Calculator Performs basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. Calendar Keeps track of your appointments and creates meeting requests. Camera Snaps photos or shoots video clips with accompanying audio.
Icon Description Notes Creates handwritten or typed notes, drawings, and recordings. Phone Makes and receives calls, switches between calls and sets up conference calling. Pictures & Videos Collects, organizes, and sorts picture and video files in the My Pictures folder of your device or on a storage card. Pocket MSN Sends and receives instant messages with your MSN Messenger contacts. PowerPoint Mobile Lets you view and edit PowerPoint slides and presentations.
Chapter 2 Entering and Searching Information 2.1 Introduction 2.2 Using the Keyboard 2.3 Using Letter Recognizer 2.4 Using Block Recognizer 2.5 Using Transcriber 2.6 Using Phone Pad 2.7 Drawing and Writing on the Screen 2.8 Recording a Note 2.
2.1 Introduction When you start a program or select a field that requires text or numbers, Input Panel automatically becomes available. Input Panel provides access to the various input methods available on your device, including Block Recognizer, Keyboard, Letter Recognizer, Phone Pad, and Transcriber. By default, the Input Panel icon appears on the menu bar to indicate which input method is currently selected.
2.2 Using the Keyboard To enter text, symbols, and numbers, you can either type using the QWERTY keyboard or the standard on-screen keyboard. For use of the hardware keyboard, see the instruction in Chapter 1. Use the standard on-screen keyboard The on-screen keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the on-screen keyboard 1. In a program, tap the Input Selector arrow, and then tap Keyboard. 2.
2.4 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. In a program, tap the Input Selector arrow, and then tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter letters by writing in the abc (left) area of the box. • Enter numbers by writing in the 123 (right) area of the box.
To write using Transcriber 1. In a program, position the cursor where you want text to appear. 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen. To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. • In a program, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again.
Do To Insert a paragraph return at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Insert a space at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Move the cursor one space back and erase any text. To do this, draw a line from right to left. Open the menu of alternate words if a word is selected or the on-screen Transcriber keyboard if no text is selected.
The Transcriber toolbar The Transcriber toolbar, which appears at the bottom of the screen when Transcriber is open, provides easy access to several tools, Enter, Space, and Backspace buttons, and Left and Right arrow buttons. Tap To Open the Options dialog box, where you can set options such as writing direction, text entry, and shorthand. Open Letter Shapes, where you can set your personal writing styles to maximize recognition.
2.6 Using Phone Pad Phone Pad provides a flexible, alternate method for entering information. Using Phone Pad, you can easily switch between three input modes: T9, Multi-Tap, and Numeric, including a list of symbols for greater convenience. To start Phone Pad 1. Start a program that accepts user input, such as Word Mobile. 2. Tap the Input Selector arrow, and then tap Phone Pad. Tip Phone Pad can be started at any time, except when your device is in Camera mode or displaying the Today screen.
You can do the following by using the T9 input mode: • To enter a word, tap the keys on the keypad. • To insert a word in the current program screen: 1. Tap any word in the wordlist (directly above the keypad). 2. Tap . 3. Select a word, and then tap • • to insert the word. To enter a number, do any of the following: • Tap and hold on the desired number key on the keypad. • Select the numeric mode, and tap the number. To insert a space or tab, tap .
Use the Options screen You can customize various behaviors for Phone Pad, including the language database on the Options screen. To access the Phone Pad Options screen, do any of the following: • Tap and hold • Tap the Input Panel icon at the bottom of the screen, and tap Options. Then, on the Input Method tab of the Input screen, tap Options. on the keypad. The Options screen provides you with the following check boxes to setup: • Turn on one-touch symbol entry.
2.7 Drawing and Writing on the Screen With your Pocket PC Phone, you can draw directly on the screen, or write on the screen and save notes in your own handwriting. To do this, you must set the input mode in Notes to Writing. If you prefer to use handwriting or frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, set Typing as the default input mode. To set the input mode for Notes 1. Tap Start > Programs > Notes. 2.
4. A selection box labeled Drawing appears around your drawing. 5. When finished, tap OK to return to the note list. Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. 2.8 Recording a Note You can create a stand-alone recording (voice note) or you can add a recording to a note. For more information about creating, changing, or saving Notes, see “Notes” in Chapter 7. To create a voice note 1.
To change recording formats 1. Tap Start > Settings > Personal tab > Input. 2. Tap the Options tab, and in the Voice recording format list, tap the format you want. 3. Tap OK. Note You can also change recording formats from within Notes. In the note list, tap Menu > Options > Global Input Options link (at the bottom of the page). 2.9 Searching Information You can search for files and other items stored on your device in the My Documents folder or on a storage card.
Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 In-Call Options 3.
3.1 Using the Phone Like a standard mobile phone, you can use your Pocket PC Phone to make, receive, and keep track of calls and send SMS messages. You can also take notes while talking, and dial directly from Contacts. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen: • Use the stylus and tap Start > Phone. - or • Press TALK on the device.
Adjust the device volume 1. Tap the Speaker icon . 2. Under Volume, adjust the phone volume ( ) or device volume ( ) by moving the slider to the desired volume level or tap On, Vibrate, or Off to change both the system and ringer volume settings. Notes To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels.
Make a call from Contacts • Tap Start > Contacts. • Tap the desired contact, and press TALK twice (once to send the number to the Phone keypad, and once to dial the number). • You can also tap the desired contact in the contacts list, and tap the phone number that you want to call. Or, tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile.
To create a Speed Dial entry 1. On Phone keypad, tap Menu > Speed Dial. 2. Tap Menu > New. 3. Tap a contact. Tap the phone number for which you want to create a speed dial. 4. In the Location box, select an available location for the new speed dial. Note Location 1 is generally reserved for your voice mail, and Speed Dial will designate the next available location by default. If you want to place a number in a position that is already occupied, the new number will replace the number that is already there.
3.4 In-Call Options To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap END or press END on your device.
3.5 Additional Dialing Information Make an emergency call • Enter the international emergency number for your locale, and tap Talk.
Chapter 4 Synchronizing Information and Setting Up E-mail Security 4.1 Using ActiveSync 4.2 Synchronizing Information 4.3 Synchronizing via Infrared and Bluetooth 4.4 Synchronizing Music, Video, and Pictures 4.
4.1 Using ActiveSync Using ActiveSync 4.x or greater synchronizes information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync.
PC Requirement to Run ActiveSync 4.x To connect your device to the PC, you need to have installed Microsoft® ActiveSync® program on your PC. ActiveSync 4.
To install and set up ActiveSync 1. Install ActiveSync on your PC, as described on the Getting Started disc. After Setup completes, the Sync Setup Wizard automatically starts when you connect your device to the PC. 2. Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard, do one or both of the following: • Create a synchronization relationship between your PC and the device. • Configure an Exchange Server connection to synchronize directly with Exchange Server. 3.
You can set up your device to synchronize with more than one PC or with a combination of one or more PCs and Exchange Server. When synchronizing with multiple computers, the items that you synchronize will appear on all of the computers with which they are synchronized.
• Select the check box for any items you want to synchronize. If you cannot select a check box, you might have to clear the check box for the same information type elsewhere in the list. • Clear the check box for any items you want to stop synchronizing. 3. To stop synchronizing with one PC completely, tap the PC, and then tap Delete. Notes Outlook e-mail can be synchronized with only one computer. To change available synchronization settings, select the type of information and tap Settings.
Schedule synchronization with Exchange Server You can schedule information to be synchronized automatically between your device and the Exchange Server, or schedule synchronization at regular time intervals. Choose between these two methods, depending on your e-mail volume and which method you think is more cost-effective.
Note When the dial-up and Wi-Fi connections are turned on at the same time, the Direct Push feature will always go through the dial-up connection, for which you could be charged as per your network operator’s service plan. To schedule synchronization at regular time intervals You can set how often to synchronize during Peak times (which usually refer to your working hours) when e-mail volume is high, as well as Off-peak times when e-mail volume is low. 1. In ActiveSync on your device, tap Menu > Schedule.
To synchronize with a PC via Bluetooth 1. Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your PC to support ActiveSync. 2. On the device, tap Start > Programs > ActiveSync. 3. Tap Menu > Connect via Bluetooth. Make sure that Bluetooth is turned on at the device and the PC, and that they are within close range. 4.
Change Media synchronization settings Once you select the Media information type in ActiveSync to be synchronized, any of your favorite music, video, and picture files in Windows Media Player playlists can be synchronized. All you have to do is set up synchronization in Windows Media Player for those media files. To set up a sync relationship with a storage card 1. Open Windows Media Player. 2. Click the Sync tab. 3. Select the storage card. 4. Click Set up Sync.
Digitally sign and encrypt all messages ActiveSync allows you to set up S/MIME e-mail encryption and signing. You will have to obtain a valid certificate for signing or encrypting e-mail before you will be able to sign or encrypt mail successfully. 1. Tap Start > Programs > ActiveSync. 2. Tap Menu > Options. 3. Select the E-mail information type, and tap Settings. On the E-mail Sync Options screen, tap Advanced. 4.
Chapter 5 Managing Your Pocket PC Phone 5.1 Personalizing Your Pocket PC Phone 5.2 Adding and Removing Programs 5.3 Managing Memory 5.4 Backing Up Files 5.5 Protecting Your Device 5.
5.1 Personalizing Your Pocket PC Phone Today screen settings The Today screen shows your upcoming appointments, active tasks, and information about e-mail messages. You can customize the Today screen on your device. To customize the Today screen 1. Tap Start > Settings > Personal tab > Today. 2. On the Appearance tab, select the desired theme for the background of the Today screen. 3. On the Items tab, select the items you want to appear on the Today screen.
4. Do any of the following: • Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. - or • Clear the Display all day events check box if you do not want to display all-day events. To set options for displaying tasks on the Today screen If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen. 1. Tap Start > Settings > Personal tab > Today. 2. Tap the Items tab. 3.
Set up Date / Time / Language / Regional options You can set up the correct date, time, language, and regional settings according to your use. To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your PC. To set an alarm 1. Tap Start > Settings > System tab > Clock & Alarms > Alarms tab. 2. Tap and enter a name for the alarm.
To change language and regional settings The style in which numbers, currency, dates, and times are displayed is specified in Regional Settings. 1. Tap Start > Settings > System tab > Regional Settings. 2. On the Region tab, select your region and language. 3. The region you select determines which options will be available on the other tabs. 4. To customize settings further, tap the appropriate tabs and select the desired options.
Note Entering and displaying owner information are best practices; they allow someone to return the device to you in case it is lost. Tip If owner information is displayed on the Today screen, you can open and edit the information directly from the Today screen. Just tap that section of the screen. To choose how to be notified about events or actions 1. Tap Start > Settings > Personal tab > Sounds & Notifications. 2.
To change the device name 1. Tap Start > Settings > System tab > About > Device ID tab. 2. Enter a name. The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words.
To set the backlight to dim after a time delay 1. Tap Start > Settings > System tab > Backlight. 2. Tap the Battery Power tab or the External Power tab. 3. Select the Turn off backlight if device is not used for check box, and specify the time delay. Phone settings You can customize phone settings, such as the ring type and ring tone to be used for incoming calls, and the keypad tone to be used when entering phone numbers. To change the ring tone 1. Tap Start > Settings > Personal tab > Phone > Phone tab.
1. Tap Start > Settings > Personal tab > Phone > Phone tab. 2. In the Keypad list, tap the desired option. Phone services More services (such as Location Setting, Voice Privacy, Network Service, TTY Mode, and Alert) are provided online, which enable you to use the add-on value services for your device. To choose the services 1. Tap Start > Settings > Personal tab > Phone > Services tab. 2. Tap the service you want to use, and tap Get Settings. 5.
• If the executable file is an installation wizard, follow the instructions on the screen. Once the program has been installed on your PC, the wizard will automatically transfer the program to your device. • If an installation wizard does not start, you will see an error message stating that the program is valid but that it is designed for a different type of computer. You will need to copy this program to your device.
Tip If you have previously inserted more than one storage card, tap the list box and then the storage card whose information you want to see. To free up program memory Try the following to free memory on your device: • Close programs you are not currently using. • Move e-mail attachments to a storage card. • Move files to a storage card. Tap Start > Programs > File Explorer. Tap and hold the file, and then tap Cut. Browse to the storage card folder and tap Edit > Paste. • Delete unnecessary files.
5.4 Backing Up Files You can back up files to your PC using ActiveSync, or copy files to a storage card you insert into your device. Your device has an expansion slot compatible with a range of mini secure digital (miniSD) storage cards. Using ActiveSync, you can copy or move information from the PC to the device and vice versa. Changes you make to the information on one computer will not affect the information on the other computer.
To automatically save files on a storage card In the Word Mobile, Excel Mobile, and Notes programs, you may find it helpful to save all new documents, notes, and workbooks directly on a storage card. 1. From the program file list, tap Menu > Options. 2. With a storage card inserted in the device, in the Save to box, tap the appropriate storage card to automatically save new items on the storage card. 3. Tap OK.
Notes Each time a wrong password is entered, the time the device takes to respond will get longer and longer until the device appears to be not responding. If you forget your password, you must follow the instructions in this owner’s manual to clear memory before you can access your device. To change your password 1. Tap Start > Settings > Personal tab > Password. You will be prompted to enter your current password. 2. In the Password box, enter your new password. 3.
5.6 Resetting Your Pocket PC Phone Occasionally you may need to reset your Pocket PC Phone. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
Chapter 6 Getting Connected 6.1 Connecting to the Internet 6.2 Internet Explorer Mobile 6.3 Using Bluetooth 6.4 Using Wireless Modem 6.5 Using Comm Manager 6.
6.1 Connecting to the Internet Your device is equipped with powerful networking functions that enable you to connect to the Internet. You can set up connections to the Internet or to a corporate network to browse the Internet, and exchange e-mail or instant messages. Your device has two groups of connection settings: My ISP (Internet Service Provider) and My Work Network.
2. Tap Start > Settings > Connections tab > Connections. 3. In My Work Network, follow the instructions for each type of connection. 4. Complete the connection wizard, and then tap Finish. To start browsing the Internet • When the connection settings are completed, tap Start > Programs > Internet Explorer. To reset or modify the network card settings on your device 1. Tap Start > Settings > Connections tab > Network Cards. 2.
6.2 Internet Explorer Mobile Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your mobile device. To start Internet Explorer Mobile • Tap Start > Internet Explorer. To choose a Home page 1. In Internet Explorer Mobile, tap Menu > Tools > Options > General tab. 2. Tap Use Current to use the displayed page as your Home page or tap Use Default to use the default Home page. Tip To go to your Home page, tap Menu > Home.
To add a favorite 1. Go to the page you want to add. 2. Tap and hold the page, and then tap Add to Favorites. 3. Confirm or change the name, and select a folder for storing the favorite. To delete a favorite or folder 1. Tap Menu > Favorites > Add/Delete tab. 2. Select the desired item, and then tap Delete. To change how Web pages fill the screen • Tap Menu > View. One Column. Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally.
To change cookies and security settings Internet Explorer Mobile supports the protocols used by Secure Sockets Layer (SSL). A connection that uses SSL helps you to send personal information more safely. Cookies are small files containing information about your identity and preferences so that a page can tailor information to your needs. The page sends the file, and it is stored on your mobile device. 1. Tap Menu > Tools > Options > Security tab. 2.
To turn on or off Bluetooth on your device 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. 3. Tap OK. Note To add an extra layer of security while beaming information with other devices, or to set up Bluetooth synchronization, tap Start > Settings > System tab > Bluetooth Setting. Bluetooth modes Bluetooth on your device operates in three different modes: • On.
Bluetooth partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. Creating a partnership between two devices involves entering the same personal identification number (PIN) on both devices. Creating a partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a PIN again.
To rename a Bluetooth partnership 1. Tap Start > Settings > Connections tab > Bluetooth. 2. Tap and hold the partnership on the Devices tab. 3. On the shortcut menu, tap Edit. 4. Enter a new name for the partnership. 5. Tap Save. To delete a Bluetooth partnership 1. Tap Start > Settings > Connections tab > Bluetooth. 2. Tap and hold the partnership on the Devices tab. 3. On the shortcut menu, tap Delete. Beam information using Bluetooth 1. On the device, tap and hold an item to beam.
it whenever you want to use the phone as a modem. Make sure that your device and the destination device are turned on, Bluetooth is turned on, and that the devices are within close range. To accept a Bluetooth partnership 1. On your device, tap Start > Settings > Connections tab > Connections. 2. Tap Add a new modem connection. 3. Enter a name for the connection. 4. In the Select a modem list, tap Bluetooth. 5. Tap Next. 6. If the device appears in the My Connections list, skip to step 11. 7.
6.4 Using Wireless Modem Wireless Modem activates your device as a wireless modem and lets you connect your PC to a wireless network. Before you create and configure a new modem using a connection, you must install the drivers on your PC. To establish a connection using Wireless Modem 1. On your device, tap Start > Programs > Wireless Modem. 2. In the Connection Type list, select USB. This allows you to connect your device via USB to a PC. 3. Tap Start.
11. Click Properties. 12.Click Change Default Preferences on the Advanced tab. 13.On the General tab, select Flow control to None. 14.Click OK until the modem installation wizard exits. To create a new dial-up connection After a new standard modem has been set up on your PC, you must create a new dial-up connection. 1. On your PC, select Start > Settings > Control Panel. 2. Double-click Network and Dial-up Connections. 3. Double-click Make New Connection. 4. Click Next to continue. 5.
Connect through a USB Port To connect through a USB port, you need to first set up a USB modem on your PC. Before setting up a USB modem, verify that you have the following files: • USBMDM • USBModem_Dialer Both files are available on the Getting Started CD. Run the Getting Started CD from the CD-ROM of your PC and do the following on your device: 1. On your device, tap Start > Programs > Wireless Modem. 2. Select USB as the connection type, and insert the USB cable adapter. 3.
Once you set up a USB modem on your PC, you are ready to establish a connection using Wireless Modem via a USB port. To establish a connection using Wireless Modem via a USB port 1. On your device, tap Start > Programs > Wireless Modem. 2. In Connection Type, select USB. 3. Tap Start. To establish a connection using Wireless Modem via Bluetooth 1. On your device, tap Start > Programs > Wireless Modem. 2. In Connection Type, select Bluetooth. 3. Tap Start.
6.5 Using Comm Manager Comm Manager acts like a central switcher that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager • Tap Start > Programs > Comm Manager. Simply tap the corresponding button to enable or disable a feature. 1 5 2 6 3 7 1 Tap to toggle between enabling or disabling the phone. 2 Tap to toggle between turning on or off Wi-Fi. Tap Settings > Wi-Fi Settings to configure Wi-Fi on your device.
Connect to a Wi-Fi network 1. On the Comm Manager screen, tap the Wi-Fi button to turn on/off the wireless function. 2. Tap Settings > Wi-Fi Settings to configure the required settings. When the configuration is completed, you can connect to a Wi-Fi network using your device. Note Tap the Network Cards icon ( ) on the Wireless LAN Settings screen to open the Configure Wireless Networks screen, which allows you to configure wireless networks and network adapters.
Check for a Wireless LAN signal You can check the current wireless connection status from the following three screens of your device: • Today screen. If your device detects a WLAN network connection, the WLAN connection icon appears at the top of the Today screen. • Wireless LAN Main screen. The current connection status and signal quality for each specific wireless channel appears on the Wireless LAN screen with the current configuration. • Configure Wireless Networks screen.
6.6 Using Terminal Services Client Terminal Services Client allows you to log on to a PC running Terminal Services or Remote Desktop, and use all the resources available on that PC. For example, instead of running Word Mobile on your device, you can run the PC version of Word and access the *.doc files available on that PC. Connect to a Terminal Server 1. On your device, tap Start > Programs > Terminal Services Client. 2. Enter the server name. 3.
Disconnect without ending a session 1. From the Terminal Services Client screen on your device, tap Start > Shutdown. 2. Tap Disconnect. Notes Do not use the Start menu on your device. If a network administrator has configured Terminal Services Client on your device to reconnect to disconnected sessions, and you previously disconnected from a Terminal Server without ending the session, the Terminal Services Client reconnects to that session. Disconnect after ending a session 1.
Chapter 7 Exchanging Messages and Using Outlook 7.1 E-mail and Text Messages 7.2 Pocket MSN Messenger 7.3 Calendar 7.4 Contacts 7.5 Tasks 7.
7.1 E-mail and Text Messages Messaging is where all of your e-mail accounts and your text message account are located. You can send and receive Outlook e-mail, Internet e-mail through an Internet service provider (ISP), and text messages. You can also access e-mail from work using a VPN connection. For more information about e-mail and text messages, see Help on the device.
Set up a POP3/IMAP4 e-mail account You need to set up an e-mail account that you have with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account) before you can send and receive mail. 1. Tap Start > Messaging. 2. Tap Menu > Tools > New Account. 3. Enter your e-mail address, and then tap Next. Auto configuration attempts to download necessary e-mail server settings so that you do not need to enter them manually. 4.
Setting Description User name Enter the user name assigned to you by your ISP or network administrator. This is often the first part of your e-mail address, which appears before the at sign (@). Password Choose a strong password. You have the option to save your password so you do not need to enter it each time you connect to your e-mail server. Domain Not required for an account with an ISP. May be required for a work account. Account type Select POP3 or IMAP4.
Send and receive messages To compose and send a message 1. In the message list, tap Menu > Switch Accounts to select an account. 2. Tap New. 3. Enter the e-mail address or text message address of one or more recipients, separating them with a semicolon. To access addresses and phone numbers from Contacts, tap To. 4. Enter your message. To quickly add common messages, tap Menu > My Text, and then tap a desired message. 5. To check the spelling, tap Menu > Spell Check. 6. Tap Send.
To exclude your e-mail address when replying to all When you reply to all the recipients of an e-mail, your own e-mail address will also be added to the recipient list. You can customize ActiveSync so that your e-mail address will be excluded from the recipient list. 1. In ActiveSync on your device, tap Menu > Options. 2. Select the E-mail information type and tap Settings. 3. Tap Advanced. 4. In the Primary e-mail address text box, enter your e-mail address. 5. Tap OK. To add an attachment to a message 1.
If you have an Outlook E-mail account, do the following on your device: 1. On your device, tap Start > Programs > ActiveSync. 2. Tap Tools > Options. 3. Tap E-mail > Settings, and then select Include File Attachments. If you have an IMAP4 E-mail account with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account): 1. Tap Start > Messaging. 2. Tap Menu > Tools > Options. 3. Tap the name of the IMAP4 account. 4.
To download messages from the server To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), you first need to connect to the Internet or your corporate network, depending on the account. 1. Tap Menu > Switch Accounts to select the account you want to use. 2. Tap Menu > Send/Receive.
Verify the digital signature on a signed message you receive To verify a digital signature in the message that you receive, do the following: 1. Open the Outlook e-mail message that has been digitally signed. 2. At the top of the message, tap View Signature Status. 3. Tap Menu > Check Certificate. To view the details of the certificate in the message, tap Menu > View Certificate. Note There can be several reasons why a digital signature is not valid.
Manage folders Each Messaging account has its own folder hierarchy with five default Messaging folders: Inbox, Outbox, Deleted Items, Drafts, and Sent Items. The messages you receive and send through the account are stored in these folders. You can also create additional folders within each hierarchy. The Deleted Items folder contains messages that have been deleted on the device. The behavior of the Deleted Items and Sent Items folders depends on the Messaging options you have chosen.
7.2 Pocket MSN Messenger MSN Messenger delivers the features of MSN Messenger to your mobile device. With Pocket MSN Messenger you can: • Send and receive instant messages. • See which contacts are online or offline. • Subscribe to status updates for selected contacts so you know when they come online. • Block contacts from seeing your status or sending you messages. Before you can use MSN Messenger, your device must be connected to the Internet.
To add or delete contacts • To add a contact, tap Menu > Add a Contact, and then follow the instructions on the screen. • To delete a contact, tap and hold the contact’s name, and then tap Delete Contact from the shortcut menu. To send an instant message 1. Tap the contact to whom you want to send a message. 2. Enter your message in the text entry area at the bottom of the screen, and tap Send. Tip To quickly add common phrases, tap Menu > My Text and select a phrase in the list.
7.3 Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example. You can look at your appointments in several different views (Day, Week, Month, Year, and Agenda).
6. Tap OK. 7. The meeting request will be sent to the attendees the next time you synchronize your device with your PC. Note When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well. To set a default reminder for all new appointments You can have a reminder automatically turned on for all new appointments you schedule. 1. Tap Start > Calendar. 2. Tap Menu > Options > Appointments tab. 3.
Tips If someone who is not in your list of contacts calls you or sends you a message, you can create a contact from Call History, or from the message by tapping Menu > Save to Contacts. In the list of contact information, you’ll see where you can add a picture or assign a ring tone to a contact. To change contact information 1. Tap Start > Contacts. 2. Tap the contact. 3. Tap Menu > Edit and enter the changes. 4. When finished, tap OK.
Begin entering a name or phone number in the provided text box until the contact you want is displayed. To show all contacts again, tap the text box and clear the text, or tap the arrow to the right of the text box. - or Use the alphabetical index displayed at the top of the contact list. - or Filter the list by categories. In the contact list, tap Menu > Filter. Then tap a category you’ve assigned to a contact. To show all contacts again, select All Contacts.
• In a new meeting request using Calendar, tap Attendees and then tap Menu > Find Online. 4. Enter the part or full contact name and tap Find. Tap Select to choose the desired contact(s) from the list. Notes Your device must be set up with a data connection. You can search on the following information as long as that information is included in your organization’s GAL: First name, Last name, E-mail name, Display name, E-mail address, or Office location.
7.5 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly. You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task 1. Tap Start > Programs > Tasks. 2. Tap New, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3. When finished, tap OK. Tip You can easily create a short, to-do-type task.
4. Tap OK to return to the task list. Note The new tasks must have due dates set in order for the reminder to take effect. To show start and due dates in the task list 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Show start and due dates check box. 4. Tap OK. To locate a task When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap Start > Programs > Tasks. 2.
7.6 Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. With Notes, you can also record a voice note. For more instructions about recording a voice note, see “Recording a Note” in Chapter 2. Enter information in Notes There are several ways to enter information in a note.
Chapter 8 Experiencing Multimedia 8.1 Using Camera and Camcorder 8.2 Using Pictures & Videos 8.
8.1 Using Camera and Camcorder Taking photos and recording video clips along with audio is easy with your device’s built-in camera. To switch to any of the Camera modes • Tap Start > Programs > Camera. - or • Tap Start > Programs > Pictures & Videos > Camera icon. - or • Press and hold the CAMERA button on the device for two seconds. To exit the Camera • Tap the exit icon ( ). - or • Press OK on the device.
The available capture modes of the camera are as follows: • Photo: Captures standard still images. • Video: Captures video clips, with or without accompanying audio. • Contacts Picture: Captures a still image and gives you the option to immediately assign it to a Photo ID for a contact. • Picture Theme: Captures still images and places them within frames. • Panorama: Captures a sequence of still images continuously in one direction, and allows stitching of all images to create a collage.
The NAVIGATION control • Press NAVIGATION up or down to increase or decrease the zoom level. • Press NAVIGATION left or right to go to the previous or next sequential capture mode. The CAMERA button Press and hold the CAMERA button on the device for two seconds to switch to Camera mode. If already in Camera mode, press once to take a still image or to start recording a video clip. Camera mode icons 110 • Current time indicator.
• Flash. Tap the flash icon to turn on/off the flash light. The icon indicates the flash light is turned on; the icon indicates the flash light is turned off. • Picture Viewer. Tap the viewer icon ( Videos. • Exit. Tap the exit icon ( ) to view the picture or video in Pictures & ) to exit the Camera program. Review mode icons • Back to Preview. Tap • Send. Tap • Delete. Tap • View in Pictures. Tap to switch to Pictures & Videos program. The captured image will be displayed in the Detailed View.
Use Video capture modes While using the Video capture mode, you can press CAMERA on the device or ENTER on the NAVIGATION control to start recording a video clip (with audio if desired). To stop recording, press CAMERA or ENTER again. Your device displays the first frame of the captured video clip by default on the Review screen.
Capture mode Photo Capture mode Video Contacts Picture Picture Theme Panorama Sport Burst Note Capture size setting Zoom range Scaled (1600 x 1280) No zooming available. 1.3M (1280 x 1024) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.0x Capture size setting Zoom range Large (320 x 240) 1.0x to 2.0x Medium (176 x 144) 1.0x to 2.0x Small (128 x 96) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.
Use the Camera Settings screen While capturing a still image or video clip using any capture mode, tap the tool icon ( ) to access the Camera Settings screen. The Camera Settings screen allows you to configure the capture settings. You can configure the following settings on the Camera Settings screen. Setting Allows you to Capture mode Select a capture mode. Capture format Select a capture format. Capture size Select a capture size. Capture frequency Select a capture frequency.
Use the Tools menu The Tools menu on the Camera Settings screen provides the following advanced options for configuring and customizing the Camera mode functions. The Adjust item Tap Tools > Adjust to adjust the camera display properties, such as Contrast, Brightness, Saturation, Hue, and Sharpness. Select one of these properties from the list and move the slider (or tap the slider) to change the value. The preview window on the Adjust screen displays the effect of changes you make on the Adjust screen.
• • 116 • Apply “Date and time stamp” while capturing images. Select this check box to automatically compose the current date and time in the captured images. • Flicker adjustment. To eliminate flicker image, select the proper frequency (50Hz or 60Hz) of the country where the device is being used. • Save. Select where you want to save your captured files. You can either save the files to main memory or to a storage card. Image tab. This field provides image-related settings for captured files.
• Recording with Audio. Select this check box to record audio with the captured video clips. This check box is selected by default. If you clear this check box and then capture a video clip, it would have no audio. 8.2 Using Pictures & Videos The Pictures & Videos program collects, organizes, and sorts images and video clips in the following formats on your device. File type File extensions Image *.bmp, *.jpg Video *.avi, *.wma, *.mp4, *.
To view pictures 1. Tap Start > Programs > Pictures & Videos. The images in the My Pictures folder appear as thumbnails by default. 2. Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow. To play videos with audio 1. Tap Start > Programs > Pictures & Videos.The videos in the My Videos folder appear as thumbnails by default, which appear with a media icon ( ). 2.
To sort pictures and video clips If you store a large number of pictures or video clips on your device, you may find it helpful to sort them to quickly find a specific picture or clip. You can sort by name, date, and size. 1. Tap Start > Programs > Pictures & Videos. 2. Tap the sort list (labeled Date by default), and select the item you want to sort by.
To set a picture as the Today screen background 1. Tap Start > Programs > Pictures & Videos. 2. Select the picture you want to set as the background. 3. Tap Menu > Set as Today Background. 4. In Transparency level, select a lower percentage for a more transparent picture, or a higher percentage for a more opaque picture. Then tap OK. To beam a picture You can beam a picture to your friends or a family member using Infrared. 1. Tap Start > Programs > Pictures & Videos. 2. Select the picture you want to beam.
8.3 Using Windows Media Player You can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site. Using Windows Media Player, you can play both audio and video files. These are the following file formats that are supported by this version of Windows Media Player. Supported video file File formats • Windows Media Video • MPEG4 Simple Profile • H.
About the screens and menus Windows Media Player has three primary screens: • Playback screen. The default screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume), the album art window, and the video window. You can change the appearance of this screen by choosing a different skin. • Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the currently playing file and any files that are “queued up” to play next.
Now Playing screen menu When you are viewing the Now Playing screen, the following commands appear on Menu. This control Does this Library Displays the Library screen so you can choose a file to play. Move Up/Down Moves the selected item up/down in the playlist order. Remove from Playlist Deletes the selected item from the playlist. Shuffle/Repeat Plays the items in the Now Playing playlist randomly/repeatedly. Clear Now Playing Deletes all items from the Now Playing playlist.
About licenses and protected files Some content (such as digital media files downloaded from the Internet, CD tracks, and videos) have associated licenses that protect them from being unlawfully distributed or shared. Licenses are created and managed by using digital rights management (DRM), which is the technology for securing content and managing its access rights. Some licenses may prevent you from playing files that have been copied to your device.
To play an item on a network Use the Open URL command to play a song or video that is stored on the Internet or on a network server. 1. If you are not on the Playback screen, tap OK to close the current screen and display the Playback screen. 2. Tap Menu > Open URL. 3. In the URL box, enter a network address or in the History box, tap a URL that you have previously used. Note To play an item on a network, you must be connected to a network.
Accessibility for people with disabilities Microsoft is committed to making its products and services easier for everyone to use. Many accessibility features have been built into Microsoft products, including features for individuals who have difficulty typing or using a mouse, who are blind or have low vision, or who are deaf or hard-of-hearing. For more information about the following topics, see the Accessibility section of the Microsoft Web site (http://www.microsoft.com/enable/ default.aspx).
Chapter 9 Using Other Applications 9.1 Word Mobile 9.2 Excel Mobile 9.3 Viewing Slide Shows with PowerPoint Mobile 9.
9.1 Word Mobile Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically.
• Bi-directional text. While Word Mobile will open documents containing bi-directional text, the indentations and alignment may be displayed and saved incorrectly. • Password-protected files. Word Mobile does not support opening passwordprotected documents. You must first remove the password protection in Word on the PC if you want to view the document on the device. • Document protection. Word Mobile does not support displaying files that have been protected in Word on the PC.
9.2 Excel Mobile Excel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also can create new workbooks and templates on your device. Tips Work in full-screen mode to see as much of your workbook as possible. Tap View > Zoom and select a percentage so that you can easily read the worksheet. Unsupported features in Excel Mobile Excel Mobile does not fully support some features such as formulas and cell comments.
• Zoom settings. Are not retained. Excel supports a per worksheet zoom setting, while the Excel Mobile zoom setting is applied to the entire workbook. • Worksheet names. Names that reference worksheets within the same workbook are displayed accurately, but names that refer to other workbooks, arrays, for example, ={1;2;3;4}, array formulas, or intersection ranges are removed from the name list.
9.3 Viewing Slide Shows with PowerPoint Mobile With PowerPoint Mobile, you can open and view slide show presentations created on your PC in *.ppt and *.pps format with PowerPoint ‘97 and later. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device. If the presentation is set up as a timed slide show, one slide will advance to the next automatically. Links to URLs are also supported.
Notes If you have zoomed in to see a slide in more detail, you cannot navigate to another slide until you zoom out. Tapping Next or Previous may play an animation on a slide rather than navigate to another slide. Tip Simply tap the current slide to go to the next one. 9.4 Using Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. Create a voice tag for a phone number 1.
3. Select the phone number that you want to create a voice tag, then tap the record button ( ). Select the desired phone number. Tap the record button to start recording. 4. When completed, a voice tag icon ( ) will be displayed on the right of the item. 5. When you create a voice tag for the item, you can do one of the following: • Tap the record button ( • Tap the play button ( • Tap the delete button ( ) to rebuild the voice tag. ) to play the voice tag. ) to delete the voice tag.
Create a voice tag for a program 1. Tap Start > Settings > Personal tab > Voice Speed Dial. 2. On the Application tab, it displays a list of all installed programs on your device. 3. Create a voice tag for the desired program as described above. 4. Now, you can launch the program by saying the recorded voice tag after pressing the Voice Recorder button. Make a call or launch programs using a voice tag 1. Press the Voice Recorder button on your device. 2.
Appendix A.1 Regulatory Notices A.2 Specifications A.
A.1 Regulatory Notices Regulatory Agency IDs For regulatory identification purposes, your product is assigned a model number of PA10A. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your PA10A. The “x” portion of the above model number(s) could be any alphanumeric character (or blank) denoting external cosmetic changes. This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use. In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation.
Important Health and Safety Information Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions. General Precautions • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself.
• • • • Avoid unstable mounting Do not place the product with an unstable base. Use product with approved equipment This product should be used only with personal computers and options identified as suitable for use with your equipment. Adjust the volume Turn down the volume before using headphones or other audio devices. Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
SAR Information SAR: 1.098 W/kg @1g (USA) THIS MODEL DEVICE MEETS THE GOVERN-MENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless mobile CDMA phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
* In the U.S. and Canada, the SAR limit for mobile CDMA phone used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. Normal condition only to ensure the radiative performance and safety of the interference.
A.2 Specifications System Information Processor Intel PXA270 416Mhz Memory - ROM : M-System 128MB NAND Flash - RAM : 64/ 128MB SDRAM Operating System Microsoft Windows MobileTM 5.0 Software for Pocket PC Display LCD Type 2.8” transflective TFT-LCD with back-light LEDs, touch-sensitive screen Resolution 240 x 320 pixels Alignment Support Portrait and Landscape CDMA Module(Dual Band) Functionality CDMA2000 Mode Dual band: 800, 1900 MHz External Antenna Yes Camera Module Type 1.
Expansion Slot MiniSD card Yes Controls and Lights Buttons - 5-way navigation pad: - Three program buttons: Voice Recorder, Internet Explorer, Camera - Two phone functions : Call, End - Volume control slider - Power On/Off - OK button - Start button - Reset switch Keyboard QWERTY type, 39 keys + 2 SOFT KEYs LED Right: Bi-color (Green and Red) LED for CDMA network status, PDA notification, and PDA charging status Left: Bi-color (Blue and Green) LED for Bluetooth and Wi-Fi status Audio Audio Controll
A.
I N In-Call Options 40 Indicators 18 Infrared (IR) 9, 49 Input Panel 23 Input Selector 23 Internet Explorer Mobile 71 Cookies and security settings 73 Favorites 71 History list 72 Home page 71 Temporary Internet files 73 Web page 72 NAVIGATION Control 9 Notes 106 K Keyboard 24 On-screen keyboard 24 QWERTY keyboard 12 Keypad tone 60 L Letter Recognizer 24 M Managing Memory 62 Media synchronization settings 51 MSN Messenger 97 Blocking/unblocking contacts 98 Checking status 98 Sending instant message 98
S Safety Information 140 Searching Information 34 Shortcuts 57 Specifications 144 Starting Up 14 Start Menu 19 Storage card 9, 50 Synchronizing Music, Video, and Pictures 50 Sync Setup Wizard 43 T Z Zoom 112 Tasks 104 Terminal Services Client 85 Text Size 16 Today Screen 17 Background image 54 Today screen settings 54 Transcriber 25 U USB cable 11 USB cradle 11 V Voice mail 19 Voice Speed Dial 133 Voice tag 133 W Wi-Fi Settings 83 148 Windows Media Player 121 Controls 121 Library screen 123 Menu 122 N
