Data Sheet

21
Raspberry Pi Zero
Raspberry Pi Zero has 4 mounting holes, but only two of them could be used to mount
the USB hub under it.
Raspberry Pi Zero supports back-powering via the data USB port, so you can just put
the jumper to “Power Link” position and connect power supply to the USB hub. To
connect the upstream USB port to Raspberry Pi Zero’s data USB port, you will need a
USB - OTG adapter (not included in the package).
If you don’t want the back-powering, just put the jumper to the other side and connect
two power supplies to USB hub and Raspberry Pi Zero accordingly.