Product Description

Uumao10W Invisible Fast Wireless Charging

1,Product Description:

This product is a wireless charging transmitter for standard QI. The minimum distance is

5MM.

The maximum distance is 30MM.

2,Scenes To Be Used:

Suitable for installation under thick desktops. Suitable for marble, wood, glass and other

non-metallic non-conductive tables.

3,Charging Parameters:

TYPE-C input: 12V (please use the donated12V3A adapter)

Wireless output power: 10W/7.5W/5W, USB wired output power: 5V2A

Effective charging distance: 5MM-30MM

4,How To Install:

No drilling or tools required, you can peel off the double-sided tape on the wireless

charging

surface and quickly install and paste it on the lower surface of the table. Will not cause

permanent damage to your desktop or counter-(optional mounting screws also included).

After installing the wireless charger, use the signal detector to find the signal.

5,Wireless Charging Signal Detector:

When the wireless charging signal is detected,The lamp beads will light up.The brightest

place is where the signal is strongest.

PAGE 1
Uumao10W Invisible Fast Wireless Charging 1,Product Description: This product is a wireless charging transmitter for standard QI. The minimum distance is 5MM. The maximum distance is 30MM. 2,Scenes To Be Used: Suitable for installation under thick desktops. Suitable for marble, wood, glass and other non-metallic non-conductive tables. 3,Charging Parameters: TYPE-C input: 12V (please use the donated12V3A adapter) Wireless output power: 10W/7.
PAGE 2
6,Safety Protection: It has safety protection functions such as overcharge, overcurrent, and overtemperature. 7,Warn: 1. Do not charge at a distance less than 5MM. If the receiving distance is less than 5MM, the charging and receiving equipment may be damaged. 2. Do not charge at a distance greater than 30MM. More than 30MM. It may cause Apple 12 to fail to charge. Or the phone case is too thick to charge. 3. Do not use metal or other conductors that are impermeable to electromagnetic waves. 4.
PAGE 3
FCC Statement This device complies with part 15 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment.