User's Manual

1. Product introduc on
Thank you for choosing to purchase our company's wireless charging product, This
is a wireless charger that supports QI devices.
2. Product parameters
Name: 6 coil 3 in 1 wireless charger
Model: X6
Material: Plas c + PU leather cover
Color: electroplated silver
Interface: Type-C
Input current: 12V-3A Max
Output power: 10W Max
Compa bility: Compa ble with iPhone 12 /11/XR/SE/X/8, 10W charging mode is
compa ble with S21/S20/Note 10/S10/Note9 and so on; 5W charging mode works
on Any Qi-enabled devices like Google Pixel 3/3XL /4XL and other Qi-enabled
phones.
Product size: 20.3cm*8.4cm*1cm (without packaging)
Product weight: 160g (without packaging)
Note: The above parameters are derived from actual product measurements, and
actual parameters may vary due to products or other factors.
3, packing list
Wireless charger*1
Manual *1
Adapter*1
. 4 Instrucons for use
1. Insert the Type-C interface of the adapter into the wireless charger. Then
aach the wireless receiving posion of the mobile device that supports
wireless charging to the wireless charger transmission area, and try to ensure
that the wireless receiving posion is aligned with the center of the product.
(The wireless receiving locaon is generally in the center of the mobile device).
2. This product can charge two mobile phones with 10W/7.5W fast charging
and 5W charging at the same me.
3. Do not use a voltage lower than 12V3A to power this product. Otherwise,
the output power will be reduced.
4. When charging is complete, please remove the wireless charger.
. 5 LED indicator descripon
1. Turn on: the red and blue lights flash once and then go out.
2. Charging: the blue light is always on.
3. FOD foreign body detecon: the red light flashes.
. 6 Maers needing aenon
During the charging process of the wireless device, the mobile device runs
high-power applicaons on the mobile device or uses the applicaon on the
device for a long me, and the mobile device heats up. This is a normal
situaon and will not affect the service life or performance of the device. .
1. This product is Compable with iPhone 12 /11/XR/SE/X/8, 10W charging
mode is compable with S21/S20/Note 10/S10/Note9 and so on; 5W charging
mode works on Any Qi-enabled devices like Google Pixel 3/3XL /4XL and other
Qi-enabled phones.;
2. It is recommended to use the matching adapter for this product. In order
to get a beer charging experience.
3. The equipment can be used in an ambient temperature between 0°C and
35°C. The device can be stored at an ambient temperature in the range of
-20°C to 50°C. Using or storing the device outside the recommended
temperature range may damage the device or shorten the baery life;
4. Do not allow children or animals to chew or swallow the device;
5. Do not disassemble, modify or repair the equipment;
6. Do not place magnec stripe cards (including credit cards, telephone
cards, bank books, and registraon cards) near the charging device to avoid
damage to the magnec stripe card due to the magnec field generated by
the device.
5
Company: Shenzhen LazyCat Communicaon Technology Co., Ltd.
Address: Room 612, Building A, Building 16, Jie wei Industrial Park, Pinghu,
Longgang District, Shenzhen
Hotline: [phone]
Website: www.chargingelfcat.com
Made in China
Wireless Charger
Instrucon
Please Read This User Manual Completely And Keep It Properly
5 Coil Charging Area
1 Coil Watch Charging Area
Type-C interface
Non-slip silicone
Heat dissipaon and
venlaon hole design
LOGO label
Boom
Top
正面1 正面2
正面3
正面4