User’s Manual TC-9200
Features Dual Mode DTMF/FSK compatible 16 Digit LCD display 38 Incoming calls memory 5 outgoing calls memory Auto add -‘0’- in call back Basic Calculator 3-Progammable Alarm clock settings Special Ring for VIP numbers 2-way speaker phone with adjustable volume M1,M2 One touch memory 5 Level LCD contrast adjustable(Default 3-Level) In Use LED indication Pause Function Flash Time 300 ms Last number Redial 4-step programmable ringer volume control Programmable selec
LCD Descriptions IN:“IN”will be displayed on LCD, when checking incoming calls. OUT:“OUT” will be displayed on LCD, When checking outgoing calls. NEW:“NEW”will be displayed on LCD whenever new call is received. REPEAT:“REPEAT”will be displayed on LCD, when repeated call is received from the same number, In such a case date/time of last call will be displayed. LOCATION DESCRIPTION 1. 2. 3. 4. 5. 6. Number key M2 key M1 key UP/- key Receiver Hook-switch 7. 8. 9. 10. 11. 12.
13. 14. 15. 16. 17. 18. OUT/× key VIP/PAUSE key SET/STORE key VOL key SPEAKER PHONE key RD/BACK key 19. 20. 21. 22. FLASH key HOLD/RING/÷ key Coiled Cord TEL Line RECEIVING CALLS The unit will ring when a call comes, if you have subscribed caller ID service to your local telecom, LCD will display month, date, time, serial no. of the incoming call and ”NEW” icon. If a missed call comes two times or more, the “REP” icon will be displayed on the LCD. From the handset 1.
3. Press RD/BACK key, the number will be dialed out. REVIEWING, CALLING BACK AND DELETING INCOMING CALL The telephone can record 38 Incoming calls. Over 38 incoming calls, the earliest one will be replaced. For repeat incoming call, LCD displays “REP”. A secret number comes, LCD displays …p… For error incoming message, LCD displays …E… If incoming call is from an area without Call ID service, LCD displays …o… Reviewing incoming call 1. In on-hook or off-hook state 2.
Note: Press DEL key for 3 seconds, all the outgoing calls will be erased. SETTING MENU SETTING DATE AND TIME 1. In on-hook state, press SET/STORE key, LCD displays SET 1 DATE 2. Press SET/STORE key, the last two digits of year flash. 3. Press UP key to edit the year, press SET/STORE key to confirm, by using the same method to SET/STORE the month, date, hour and minute. 4. Press DEL key to quit. Note: Scope: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59 SETTING LOCAL AREA CODE 1.
Press SET/STORE key, press UP or DOWN key to select OFF or ON press DEL key to quit. SETTING DIALING MODE 1. In on-hook state, press SET/STORE key and then press UP key fourth, LCD will display SET 5 P-T. 2. Press SET/STORE key to confirm, LCD displays TONE , press UP or DOWN key to select TONE or PULSE. SETTING ANTI-DIALING FUNCTION 1. In on-hook state, press SET/STORE key and then press UP key sixth, LCD displays SET 6 ALAR 2.
number. When redial, need not dial PABX number and PAUSE key, just press REDIAL key. SETTING RINGING TONE There are 8 kinds of ringing tone for selection: 1. In on-hook state, press HOLD/RING key, LCD display RING 01. 2. Press UP or DOWN key to select ring tone. Besides, you can also press HOLD/RING key repeatedly to select the ringer. SETTING LCD CONTRAST In on-hook state, press CONTRAST key. The LCD displays LCD 3. Press CONTRAST key，You can choose what you want. 5 levels of LCD contrast adjustable.
numbers, results will not be accurate. 3.Press ‘DEL’ key or Answer a new call or during clock alarm ring,the unit will auto quit from calculator state. WALL MOUNTABLE When use it as wall-mounted, put the handset aside, hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. Rotate the handset tab by 180 degrees, then replace the handset tab into the slot until it locks into position.
