User Manual
Table Of Contents
- User’s Manual
- RECEIVING CALLS
- MAKING A CALL
- REVIEWING, CALLING BACK AND DELETING INCOMING CALL
- REVIEWING, CALLING BACK AND DELETING OUTGOING CALL
- SETTING MENU
- SETTING DATE AND TIME
- SETTING LOCAL AREA CODE
- SETTING PABX CODE
- SETTING AUTO IP
- SETTING ANTI-DIALING FUNCTION
- SETTING ALARM CLOCK
- ONE-TOUCH MEMORY
- FLASH FUNCTION
- PAUSE FUNCTION
- SETTING RINGING TONE
- SETTING RINGING VOLUME
- SETTING HANDS-FREE VOLUME
- HOLD ON MUSIC
- WALL MOUNTABLE
- TROUBLE SHOOTING
Note: Press DEL key for 3 seconds, all the outgoing calls will be erased.
SETTING MENU
SETTING DATE AND TIME
1. In on-hook state, press SET/STORE key, LCD displays SET 1 DATE
2. Press SET/STORE key, the last two digits of year flash.
3. Press UP key to edit the year, press SET/STORE key to confirm, by using the same method to
SET/STORE the month, date, hour and minute.
4. Press DEL key to quit.
Note: Scope: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59
SETTING LOCAL AREA CODE
1. In on-hook state, press SET/STORE key and then press UP key, LCD will display SET 2 CODE
2. Press SET/STORE key again, LCD displays CODE -----
3. Press UP key to SET/STORE the first digit of local area code
4. Press SET/STORE key to confirm and enter the second digit setting, follow same steps to
SET/STORE the last 4 digits.
5. Press DEL key to quit.
Notes:
1. If the local area code only 4 digits, the last digit can be left as “-”.
2. After SET/STORE the local area code, unit will auto-filter the area code if the incoming call number
with the first several digits as same as the local area code.
3.
SETTING PABX CODE
1. In on-hook state, press SET/STORE key and then press UP key twice, LCD will display SET 3
PCODE
2. Press SET/STORE key to confirm, LCD displays PCODE --, the first “-“ flashes and indicate to
SET/STORE the first digit of PABX code.
3. Press UP key to SET/STORE the PABX code. Press SET/STORE key to confirm and enter the
second digit setting.
4. Following same steps to SET/STORE the second digit.
Notes:
1. If only one digit of PABX code, left the second digit as“-“.
2. If SET/STORE PABX code, when dialing back incoming call or pre-dial a number, and if the
number is 6 digits or more than 6 digits, the telephone will auto-add PABX code ahead the
incoming number or the pre-dialing number which is not lead by PABX code and then pause 1
second.
3. The telephone will not lock PABX code but lock the number following PABX code.
SETTING AUTO IP
In on-hook state, press SET/STORE key and then press UP key three times, LCD will display SET 4
AUTO IP