User Manual

number. When redial, need not dial PABX number and PAUSE key, just press REDIAL key.
SETTING RINGING TONE
There are 8 kinds of ringing tone for selection:
1. In on-hook state, press HOLD/RING key, LCD display RING 01.
2. Press UP or DOWN key to select ring tone.
Besides, you can also press HOLD/RING key repeatedly to select the ringer.
SETTING LCD CONTRAST
In on-hook state, press CONTRAST key. The LCD displays LCD 3. Press
CONTRAST key
，
You can choose what you want. 5 levels of LCD contrast adjustable.
SETTING RINGING VOLUME
In on-hook state, press VOL key continuously to adjust the ringer volume, there are 4 levels can be
select.
SETTING HANDS-FREE VOLUME
In off-hook state, press VOL key continuously to adjust the hands-free volume, there are 2 levels can
be select.
HOLD ON MUSIC

When talking over handset, press HOLD/RING key to enter the hold mode and the hold
music is sent out. In hold mode
1. Press HOLD/RING key to release hold mode and continue to talk over handset, or
2. Hang up handset, it enters hands-free hold mode.
 When talking at hands-free mode, press HOLD/RING key to enter the hold mode and the
hold music is sent out. In hold mode
1. Pick up handset to talk over handset, or
2. Press or HOLD/RING key to quit hold mode and talk at hands-free mode.
CALCULATOR FUNCTION

In the On or Off – hook state, press “CAL”key.
 LCD will display digit ‘0’ on the extreme right corner. Now the telephone is in the state of calculator.

In the calculator state, ‘HOLD/RING/÷’ key is used as ‘÷’ key.

In the calculator state, ‘OUT/×’ key is used as ‘×’ key.
 In the calculator state, ‘UP/-’ key is used as ‘-’ key.

In the calculator state, ‘DOWN/+’ key is used as ‘+’ key.

In the calculator state, ‘*/.’ Key is used as ‘.’ Key.
 In the calculator state, ‘#/=’ key is used as ‘=’ key
Note:
1.If any mistake committed during calculation, press ‘CAL’ key to restart.
2.The calculation work can be done accurately of Max. 10 digit numbers. Over 10 digit