Owner manual

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 21
Use the slider bar to adjust various
camera and lens settings, including
Exposure, Aperture, Histogram, Focus
and Zoom (if applicable). To adjust the
settings, do one of the following:
• Press and drag the marker (small
purple triangle) to the desired
position;
• Touch anywhere along the white
slider bar and the marker will
automatically “snap” to that position
(not applicable to Histogram); or
• Touch the “–” and “+” buttons to
make fine adjustments to the settings
(not applicable to Histogram).
Touch the Exposure button to activate
exposure time adjustment for live image
preview and capture. To make
adjustments to the exposure time:
1. Using the time displayed above the
slider bar, touch the numbers
corresponding to the portion of the
time to be adjusted (ms, sec, or
min); then
2. Use the slider bar to make
adjustments to this portion of the
exposure time (ms, sec, or min).
The current exposure time will be
indicated below the word “Exposure” on
the Exposure button (here, the exposure
time is “00:00:00”) as well as above the
slider bar (00:20:020).
This function is active when the button
reads “Exposure” in yellow lettering and
the words “Exposure Time” appear below
the slider bar.
NOTE: Using the Auto Capture function
will override any manually entered
exposure times.
Marker