User Manual

User Instructions
81-0201-02 Rev. A
UVP, Inc. 2066 W. 11th Street
Upland, CA 91786
[phone] / [phone]
Fax: [phone]
Ultra-Violet Product Ltd., Trinity Hall Farm Estate
Unit 1, Nuffield Rd, Cambridge CB4 1TG UK
Tel: [phone]
Fax: [phone]
Internet: www.uvp.com
Drawer Installation
Place the Benchtop Transilluminator into the drawer. Connect the
power cord to the back of the transilluminator and push the plug through
the access hole in the back of the drawer. Connect the plug to the
power source. Access to the transilluminator switch is via the access
port on the front of the drawer.
Place the DigiDoc-it hood enclosure over the drawer. Install the
camera. Refer to the DigiDoc-It manual for additional instructions on
setting up or using the camera and hood.
Drawer Assembly for the
DigiDoc-It System
Doc-It is a registered trademark and DigiDoc-It is a trademark of UVP, Inc.
Specifications and/or technical information are subject to change without prior notice.
Assemble the System
Access to Transilluminator Switch