EL Series UV Lamps Instruction Manual UVP, LLC 2066 W 11th Street, Upland, CA 91786 Tel: (800) 452-6788 / (909) 946-3197 Fax: (909) 946-3597 Ultra-Violet Products Ltd. Unit 1,Trinity Hall Farm Estate, Nuffield Road Cambridge CB4 1TG UK Tel: +44(0)1223-420022 / Fax: +44(0)1223-420561 Web site: www.uvp.
EL Series UV Lamps Page 2 Introduction The EL Series Ultraviolet Lamps offer a uniform and intense source of ultraviolet light (radiation). The lamps emit one of three UV wavelengths or white light in four watt, six watt and eight watt configurations for exposure/illumination of materials. All EL Series Lamps can be used with the universal J138 Lamp Stand. The four watt models can be used with C-10E Cabinet for viewing materials in a darkroom environment.
EL Series UV Lamps Page 3 95-0264-03 100/50-60/0.16 UVS-24 95-0269-01 95-0269-02 95-0269-03 115/60/0.32 230/50/0.32 100/50-60/0.32 254nm (two tubes) UVL-24 95-0267-01 95-0267-02 95-0267-03 115/60/0.32 230/50/0.32 100/50-60/0.32 365nm (two tubes) UVLS-24 95-0271-01 95-0271-02 95-0271-03 115/60/0.16 230/50/0.16 100/50-60/0.16 365/254nm (one tube each) EL Lamps - Six Watt Models Dimensions: 11.9”L x 2.5”H x 3.
EL Series UV Lamps Page 4 95-0200-02 95-0200-03 230/50/0.16 100/50-60/0.16 UVL-18 95-0198-01 95-0198-02 95-0198-03 115/60/0.16 230/50/0.16 100/50-60/0.16 365nm/White (one tube each) UVM-18 95-0199-01 95-0199-02 95-0199-03 115/60/0.16 230/50/0.16 100/50-60/0.16 302nm/White (one tube each) UVS-28 95-0249-01 95-0249-02 95-0249-03 115/60/0.32 230/50/0.32 100/50-60/0.32 254nm (two tubes) UVL-28 95-0248-01 95-0248-02 95-0248-03 115/60/0.32 230/50/0.32 100/50-60/0.
EL Series UV Lamps Page 5 Service Procedures Return Procedure A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service before returning any product to UVP. Cleaning and Care Clean unit surface with a damp soft cloth or sponge. Never use abrasive cleaners (can damage the UV filter surface). Replacing Tubes Disconnect the lamp from the electrical supply before replacing tubes. Remove the two Phillips Head screws located in the end cap.
EL Series UV Lamps Page 6 Carefully grasp the tube ends and twist one quarter turn until it works free (Fig. 2) Insert the new tube, giving it a twist to lock in place. Reassemble the lamp. Do not pinch wires during assembly. Replacement Parts/Accessories For replacement parts or components not shown here, please call UVP Customer Service or place of purchase. Please have the lamp model available when you call.
EL Series UV Lamps J-138 Lamp Stand Page 7 C-65 Cabinet J-138 Lamp Stand C-65 Cabinet (for 8-watt lamps) C-10E Cabinet (for 4-watt lams) C-10E Cabinet 18-0063-01 95-0257-01 95-0072-08 Technical Support UVP offers technical support for all of its products. If you have any questions about the product’s use or, operation, please contact UVP’s offices at the following locations.
EL Series UV Lamps Page 8 or that have been installed, used and/or serviced other than in strict compliance with the instructions appearing in this installation and instruction manual. In no event shall UVP be responsible to the end-user for any incidental or consequential damages, whether foreseeable or not, including but not limited to property damage, inability to use equipment, loss of business, loss of profits, or inconvenience arising out of or connected with the use of instruments produced by UVP.
